Scorpion tail delete is done - transferred the plate to the side of the rear wheel and moved the rear turn signals

[A1A Rider]

Pics: imgur.com/a/KLWSXH1

Thoughts?

 

[SpaceCityRocketman]

The exposed rear wheel looks good. I think yours is the first bike with a rear rack and tail tidy that I’ve seen. It’s a nice combo.

Hopefully those turn signals are bright. I couldn’t run anything that small with the traffic here in Houston.

 

[20R3GT]

I from 2021 I was thinking way how to approach rear turn signals on my rocket 3 and placement you did was only option I saw in web, but did not like cables and brackets idea so drill them in the fender!

 

[Codawg]

Pics: imgur.com/a/KLWSXH1

Thoughts?

Nice work. I just finished mine. Check out my post!

 

[Protonhound]

I'm considering these

Motorcycle LED turn signals for Triumph Rocket 3

For Rocket 3: Chic and slim indicators for front or rear. Easy to mount at the original fixing points. E-marked. By WUNDERKIND-Custom

wunderkind-custom.com

 

[Jagster]

Difficult to see conclusively from the viewing angles & lighting of the photos, but the wiring to the new turn signals look a bit wayward/untidy.
Can they be kept tight to the bodywork?

 

[RugbyRef]

Pics: imgur.com/a/KLWSXH1

Thoughts?

That looks great!

 

[AzRocketman]

Hello,
This is what I made, using the stock license plate bracket.
I ordered a new bracket from Triumph in the UK, it took about 6-weeks for delivery.
I cut the OEM license plate bracket arm and then I bent a piece of aluminum plate 1/4”
This allowed me to build this license plate bracket while I still ride.
I bought a curved license plate trim ring with LED light stripe.
I tig welded it, and dropped it off at a plating shop, and had it powder coated to match the OEM license plate bracket,
and swingarm.
Photos attached…….

 

[NewBikerAZ]

Nice job!