Rocket Sized Shift Peg


Folks what do this . . .

Whip.JPG
 


Or maybe just these screen wipers starting at $190.00 USD

PeerClear Motorcycle Windshield Wiper

cycle2.jpg



  • Peer Clear™ Standard Wiper Kit
    Peer Clear Motorcycle Windshield Wiper Systems Inc. Since 2007 is now offering a Motorized Standard Model Windshield Wiper Kit in our product line.

    System includes heavy duty motor with automatic self-park feature, integrated on/off switch, and 5 year limited warranty.

    Our Peer Clear™ Wiper reduces water drip on the back side of the windshield.

    Easy installation, drilling required.

    Drill bits not included. Purchase here!
    • Kit includes:
    • Heavy duty 12 volt motor with integrated on/off switch
    • 5 YEAR MOTOR LIMITED WARRANTY
    • Anodized motor face plate
    • 110 degree sweep
    • Parks right side of windshield
    • Black wire harness (6ft) with inline fuse, color coded terminals for easy hookup
    • 11" heavy duty natural rubber wiper blade (flat black with no glare!)
    • Heavy duty wiper arm is adjustable from 8" to 11" (flat black with no glare!)
    • 3mm hex key, for wiper arm attachment
    • All mounting hardware with rubber grommets
    • Four black zip ties for clean handlebar look
    • Easy step-by-step installation instructions.
    $190.00 USD
Peer Clear™ Premium Wiper Kit
System includes a heavy-duty motor with automatic self-park feature, black powder coated lacquered aluminum cover, and limited 3-year warranty.

Adjustable wiper arm and blade with non-glare, black coating; 8 inches to 11 inches with 11-inch natural rubber wiper blade.

Motor shaft, motor face plate, and hardware in stainless steel.

Premium Kit allows multiple switch configurations, so that your hands can remain on the grips of your motorcycle.

Settable wiper sweep angle: 90 or 110 degrees. Park position can be set to either right or left side (factory set at 110 degree sweep, parks right side.)

Our Peer Clear™ Wiper reduces water drip on the backside of windshield.

Easy installation kit included, drilling is required.

  • Wire harness: terminal ends are color coded for easy connections.
  • Touch-pad momentary switch mounts anywhere with double sided tape, measures 1 inch by 3/4 of an inch, allows for one to multiple wiper cycles.
  • 3/8 inch and 3/16 inch Plas Drill (special plastic drill bits) specifically made for drilling plastics.
  • 3mm Hex Key, for wiper arm attachment.
  • Stainless steel mounting hardware with rubber grommets.
  • Four- wire tap splices for easy wire connections.
  • Four- black Zip-Ties for clean handlebar look.
  • One black #10 screw protector.
  • Step by step instructions.
SALE! $349.99 $299.99 USD

But cannot imagine these selling too well! WTF

SKU171475_3.jpg


NEXT STEP ;):eek::confused::rolleyes::whitstling::whitstling::whitstling::whitstling::whitstling::whitstling:

575763_573044169393593_1817174007_n.jpg
 
I found this shift peg online. Actually it says for an Indian but it bolts right up to the Rocket using the standard M8 bolt. It is an extended shift peg considerably bigger than stock. Stock comes to about the third ring in the pic. It has a little cover which snaps on to hide the bolt head. At a later date I will cut the end off thats sticking out a bit so it looks finished. Just put it on so no road test as of yet but me thinks your foot should get a really good grip under this one. Plus like everything else on the Rocket its big so it fits right in.

IMG_1381.JPG

That ain't a shift peg. THIS IS A ROCKET SIZED SHIFT PEG.

TRIUMPH ST 1050 Sprint Anno 07 PROTECT SALVASCARPA 312-1 neuen Fuß -ON BLACK
 
Back
Top