Rocket 3 Clock supplied with incorrect connection plug? Please Help

psm916

Standard Bore
Joined
May 1, 2010
Messages
2
Location
UK
My Rocket 3 is a 2006 model.

I had the fuel gauge fitted by a dealer but decided to install the clock myself.

The male plug at the end of the clock cable is not compatible with the female plug on the wiring loom.

I have two questions:

1. Was the clock plug the same for all models through the years as I purchased mine online from ebay and it might be for another Rocket 3.


2. Where can I get the replacement plug compatible for the 2006 model? I don't want to remove the plug from the wiring loom as there is very little wire to play with however it would be easy to replace the male end on the clock wire.
 
Thanks for your help, I guess I must have a pre-06 loom and a post 06 clock.

I would fit a new plug on both however there is very little wire to play with on the loom plug so I'll leave it to the dealer on the next service.

I'll pop into Meet the Members
 
Back
Top