Rev limiter

[Brenna1960]

can you change just the rev limiter in the tune ECU and if so what are the limits. I think I am going to try the Doebeck set up but want to raise my limiter a grand or so.

 

[idk]

You're a braver man than me.

 

[dougl]

Raising the rev limit won't do anything unless you have enough torque up there to increase the HP.

 

[Steel]

Yes you can raise it with TuneECU to 7000 RPMs.

 

[TURBO200R4]

mine would only raise to 6800 but i like that (with tuneecu )

 

[dougl]

Yes you can raise it with TuneECU to 7000 RPMs.

You can raise it but if the HP is lower than it is at the rev limiter, there's no point.

 

[Oldschool]

The stock engines powerband is over by 6K. Raising the redline isn't going to do much for you since your not making any more power.

 

[Steel]

You can raise it but if the HP is lower than it is at the rev limiter, there's no point.

I was just answering his question.

 

[Neville Lush]

Tune ECU varies with models, some go to 6800 and some to 7000. A special tune will go higher. Tuneboy can go higher as well. So will PC V with and ign module and rev extend, to whatever rpm.

 

[Brenna1960]

I am going to put the RamAir intake on my 15 X I already have big 4" high flowing Vance & Hines Pro pipe, so basically a stock head pipe straight to the v&h. I am going to use the Doebeck EJK tuner to do away with the O2 sensor. I am having problems with the pipe flowing so much it is bringing in cooler air through and throwing off the computer so I am "hunting" bad at idol.