Rear brake fail

Sandybandy · Apr 5, 2022

Louballs said:
I agree. I can't remember too many, if any, that just had it done once.

I must be one of the lucky ones. I had mine bleed early last year and the peddle is still firm. Fingers crossed.

imcool · Apr 5, 2022

Sandybandy said:
I must be one of the lucky ones. I had mine bleed early last year and the peddle is still firm. Fingers crossed.

you are in UK probably triumph dealers know better there what they are doing

Mighty Mouse · Apr 5, 2022

imcool said:
you are in UK probably triumph dealers know better there what they are doing

They asked the builders in Thailand how to do it.

TURBO200R4 · Apr 5, 2022

Mighty Mouse said:
They asked the builders in Thailand how to do it.

imcool · Apr 6, 2022

Mighty Mouse said:
They asked the builders in Thailand how to do it.

they usually do that, Apple ask builders in china.
research and development is coming from Triumph not thailand

Fisherman · Apr 8, 2022

G8Bru said:
My front brakes went out twice!! These brakes still feel messed up even after two weeks in the dealer. Does your guys rear pedal feel stiff without using the front brake, only if i use the front brake the rear actually works well. I am aware that applying the front applies 20 percent rear.

My rear rotor also seems out of balance/bent, i can hear it riding around. And moving around the garage, fronts dont make noise, and the rear only makes noise when its at a certain part on the rotor...

My bleed dos’nt last 10 miles already had 4 of them useless system 20 grand wasted.

imcool · Apr 8, 2022

Something I found on facebook group, What you guys think? is this could be the fix/reason for rear brake?

MadMike1216 · Apr 10, 2022

So, I've had this issue also, but with some additional information. I just bought my 2006 R3C last October with 36K miles. I knew it would need a little love, but after only 250 miles, the rear brake is gone. No resistance at all. Changed the pads (They looked a bit thin), but now I'll be bleeding the brakes. The official procedure sounds....okay? Any pit falls I should be looking for? Honestly, as I go over this bike, getting ready for good weather, I'm finding more and more problems. I really hope this isn't a mistake.

stingray · Apr 11, 2022

imcool said:
Something I found on facebook group, What you guys think? is this could be the fix/reason for rear brake?

Seems like on these new ones they are being shipped out improperly bled after assembly. Trapped air up around the abs modulator is higher than the master cylinder or bleeder and resistant to normal bleeding.

bccass · Apr 12, 2022

stingray said:
Seems like on these new ones they are being shipped out improperly bled after assembly. Trapped air up around the abs modulator is higher than the master cylinder or bleeder and resistant to normal bleeding.

Exactly. Weird that my name was edited out of the post, though...

Rear brake fail

Sandybandy

.040 Over

imcool

Turbocharged

Mighty Mouse

It's All In The Reflexes!

TURBO200R4

stand up straight and grab the world by the a$$

imcool

Turbocharged

Fisherman

Standard Bore

imcool

Turbocharged

MadMike1216

Standard Bore

stingray

Petroleum Consummate

bccass

.020 Over

Similar threads

Rear brake fail

.040 Over

Turbocharged

It's All In The Reflexes!

stand up straight and grab the world by the a$$

Turbocharged

Standard Bore

Turbocharged

Standard Bore

Petroleum Consummate

.020 Over

Similar threads

Privacy & Transparency

Privacy & Transparency