Bernard Vinet
Frenchbernie
I had some backfiring happen , the only thing that I had found was wrong is exhaust pipe had come loose at one connection . Tightened all connections and backfire disappeared .
R3T cyclical hiss
- Thread starter Anomaly
- Start date
Anomaly
.060 Over
Ok, haven't found any damaged hoses or anythin' and after setting off the C02 detector in my apartment from running the bike more than a few minutes, I'm looking for the problem without firing it back up at the moment. (P.S. that CO2/smoke detector is F*ing annoying)
I did just find this random hose barb. I don't see a hose that it should go to, so perhaps it's supposed to be capped. I also didn't see it in the service manual, but that manual isn't a short read and it is entirely likely I missed it. I vaguely remember a black 1/2" rubber cap and a silver hose clamp, but I could be remembering another part of thr engine or even another bike.
I did just find this random hose barb. I don't see a hose that it should go to, so perhaps it's supposed to be capped. I also didn't see it in the service manual, but that manual isn't a short read and it is entirely likely I missed it. I vaguely remember a black 1/2" rubber cap and a silver hose clamp, but I could be remembering another part of thr engine or even another bike.
Anomaly
.060 Over
Ok, scratch that. Manual shows it empty. Just seemed oddly clean.
Kevin frazier
Widowmaker!
TURBO200R4
stand up straight and grab the world by the a$$
Anomaly
.060 Over
Well I found this pic online of a used throttle body assembly. I grabbed a piece of clear hose I had, filled one end with hot glue and zip tied it on. If it gets rid of the hiss, I'll grab a high temp hose and force a ball bearing into it for a cap.
Out of courtesy of my neighbors, I'll wait til it's light outside before I fire it up again.
Anomaly
.060 Over
Well, that wasn't it. Still getting a leak with that part capped. I'm looking for my usb-c adapter for the tuneECU cable. Not sure how much that'll help, but I'll try just about anythin' now.
TURBO200R4
stand up straight and grab the world by the a$$
take a plastic one end in your ear the other around the throttles.
be careful when u find it it is going to hurt
Anomaly
.060 Over
Tried that when this started and couldn't pin point the sound, but my hearing is crap.
Decided to make a picklejar smoker and hook it to one of the vacuum lines. It almost looks like it's comin' from the throttle body on the middle cylinder. Is that a thing... a throttle body gasket? I see somethin' online about throttle bodies adapters that looks like it could potentially leak.
I've done a bit or work fixin' things on this bike, but under the tank is not easy to manuever. I ordered a borescope on amazon so hopefully that'll help pinpoint this leak.
Stillserving
LET'S GO BRANDON
Have you looked / felt around the exhaust side to make sure it's not an exhaust leak?
Similar threads
