turbotom1052
.060 Over
- Joined
- Oct 13, 2022
- Messages
- 102
- Ride
- HD M8 Softail
That was my intention. Is your use of Power Commander over Tune Ecu due to just personal preference or have you found the Power Commander better able to deal with boost?
Don’t know if you’ve seen this:
Free unrestricted maps for Rocket R GT and TFC now online
Penner’s map should open the throttle plates to 100% at wot in road and sport modes up to 8250 rpm. The limit is 59.9% for rain mode. If the tune was downloaded and the plates aren’t open, that suggests that TuneECU isn’t doing what it says it’s doing or that the ECU is preventing it from doing...
www.r3owners.net
Posts 402&403 and previous ones by Treeman, who did Carpenter rebuilding. Apparently the throttle plates close down at 6000 rpm even with the etv set at 100%. At WOT in 4th on the dyno you wouldn’t be at the speed limit, no?
Penner said that the high end fueling is fine with etv=100% and he hasn’t added fuel above 4000 rpm and TP above 41.7%.
Regarding the rev limit, you can’t raise the rev limit above 7400 for the R and GT models and my understanding is that you need the pro version of tuneecu (300 euros) to do it.
As for getting rid of the speed limit, you should be able to go into parameters and uncheck the speed limit box. Not sure if this option is included in the pro version but in the standard version, there should be an “OPT” button next to the speed limit box with which you pay 49 euros and it lets you uncheck the box. The instructions are on tuneecu.fr. These instructions say you download a stock tune in the Tuneecu app and make the change in this tune before uploading to the ecu. It isn’t clear if you can do this on a custom tune like Penner’s which you have stored in your Android device. One would think so but I would consult Alain directly or Tom Tomtom on Facebook.
Regarding the lambda sensor(s), you can remove them and uncheck the O2 sensor box in Tuneecu to suppress error codes. Same with the SAI system. Both of these are unnecessary on a hot rod.
Alessandro_CT
.040 Over
Good evening everyone . I'm new to the group. I own a Rocket 3 R purchased in September 2022. The bike has traveled about 1000 km. I wanted to know if by installing the Penner ECU programming, without modifying the exhaust terminals and therefore leaving the original ones, there will be improvements in power and torque, like the ones I've read in the various posts. thank you all
Journeyman
"And this one is just right" ~ Goldilocks
Yes, you will absolutely feel the difference. I have the same bike with stock exhaust.
Alessandro_CT
.040 Over
Thanks for the reply . so can i leave my original exhausts and load the penner map? where will i find benefits? more acceleration? a prompt response at low revs ? I'm looking for more acceleration and torque in 1,2,3 gears. what did you find with the Penner map?
Whylee
.060 Over
- Joined
- Feb 18, 2022
- Messages
- 140
- Ride
- Harley Roadking
A android phone will work, but I did recieve a PM from Penner and was informed that there may be a issue and to hold off for now, that was about 5 days ago. Not sure if it is just for the 23 models, since thats what I asked him about, but im waiting to hear if it gets worked out.
Whylee
.060 Over
- Joined
- Feb 18, 2022
- Messages
- 140
- Ride
- Harley Roadking
Here is what I recieved from Penner
Sorry, some update.
I have talked to Tomtom from Tune-ECU and he had a good point.
There is a chance that something goes wrong while loading the map. (Low voltage, bad bluetooth connection etc)
In this case there is no OEM map yet to do a recovery and you are in trouble.
So my acvice is not to do it, until Tune-ECU has that sorted out
Sorry, some update.
I have talked to Tomtom from Tune-ECU and he had a good point.
There is a chance that something goes wrong while loading the map. (Low voltage, bad bluetooth connection etc)
In this case there is no OEM map yet to do a recovery and you are in trouble.
So my acvice is not to do it, until Tune-ECU has that sorted out
Can’t load maps to a 2500cc R3 with the Windows version.
Similar threads
