hopefully ive posted in the right forum , anyone got any original TTS fitting instructions as im retro fitting an 06 supercharger and wanna make sure its all there and right
theres a complete install video, r-111-r turbo did that, its on you tube and here under supercharger, Richard who made it, tts, im sure has exactly what you need. Lets us know it goes.
I have the instructions there if you're morbidly curious but they were also transformed into a whole picture heavy thread walking one through an install;
When installing this kit a few years ago on my bike, it occurred to me that the TTS instructions that come with the kit are a bit out-dated, and completely missing the stage 2 bits (intercooler and smaller radiator), hydraulic clutch and supercharger oil circuit installation instructions. Also...
I have the instructions there if you're morbidly curious but they were also transformed into a whole picture heavy thread walking one through an install;
When installing this kit a few years ago on my bike, it occurred to me that the TTS instructions that come with the kit are a bit out-dated, and completely missing the stage 2 bits (intercooler and smaller radiator), hydraulic clutch and supercharger oil circuit installation instructions. Also...
yeah i have been through that , although very helpful and thorough that has the new front cover and assemblies , where mine has the older one and if i can reuse it it will save me 1500 on the upgrade kit
suppose i may have not been totally clear i have taken off the old tts kit as the engine failed and i wanna refit it to a new engine , if i can refit the old parts it would save me having to buy the latest version with a different front cover . and the video from r 111 r turbo shows the new front cover assembly not the old one, and i could do with the instructions for the drilling the crank part . tts no longer have parts for the old kit so a upgrade to a new front cover would be needed
suppose i may have not been totally clear i have taken off the old tts kit as the engine failed and i wanna refit it to a new engine , if i can refit the old parts it would save me having to buy the latest version with a different front cover . and the video from r 111 r turbo shows the new front cover assembly not the old one, and i could do with the instructions for the drilling the crank part . tts no longer have parts for the old kit so a upgrade to a new front cover would be needed
ah ok i was made to believe the threads were different , but no i dont have the guides or the drills , so with those i could quite easily refit the the original kit to the new engine. although reading the above does number 6 i believe refer to the newer front cover like the one fitted to your bike , as the old kit uses the original triumph front cover.