New purchase

[Paul Johnson]

Hi all. I recently purchased a 2006 Rocket 3 Classic and looking for advice on lifting bike safely to elevate bike high enough to rotate wheels,remove wheels etc. I have the standard hydraulic jack as well as an ATV type jack and really don't want to buy a 200.00 lifting stand just for use on rear wheel. Any help is certainly appreciated. Thanks,Paul

 

[mexican]

Welcome to the nad house Paul, you will find a lot of intelligent guys in here to guide you with your mods and tunes, sadly, im not one of them

 

[Jag]

Welcome from NJ. try searching this site. Bike lift bike jack. Lots of info here

 

[RKTNMYPKT]

Welcome to the nad house Paul, you will find a lot of intelligent guys in here to guide you with your mods and tunes, sadly, im not one of them

Ditto

 

[idk]

G'day and welcome. The ATV jack will work well, but you will need to fabricate, or otherwise acquire, a bracket to bolt on to the little holes on either side of the frame to support the bike on the ATV jack. I made a paddock stand and bracket, and the bracket works with the ATV jack. Instructions are here. Others have made better looking ones.

 

[breeze]

Welcome to the nad house Paul, you will find a lot of intelligent guys in here to guide you with your mods and tunes, sadly, im not one of them

x3

 

[Paul Johnson]

Ditto

 

[Paul Johnson]

Thanks to all for your input on the cycle jack info. Best,Paul

 

[cardinal93]

Welcome from Germany! I simply took a piece of 3/4" steel, notched it for the mounting points and lay it right on top of the back arm of the atv jack. Works like a charm

 

[1olbull]

A hearty WELCOME to ya, Paul!