Mounting an Exedra Max rear tire on the new 3R = Better Handling

Awesome, looking forward to your opinion on the new tire.
Am going for a scenic ride this afternoon, only rode the new slick tire back from Seattle to my friend's house in the wet
Awesome, looking forward to your opinion on the new tire.
It definitely turns in better as everyone has stated and I really like it. The tire does have that lip on the edges which makes it a tad wider so I'm expecting more water being thrown around since the rear fender piece does not cover it entirely but almost .
 
Awesome, looking forward to your opinion on the new tire.
Am going for a scenic ride this afternoon, only rode the new slick tire back from Seattle to my friend's house in the wet
Awesome, looking forward to your opinion on the new tire.
It definitely turns in better as everyone has stated and I really like it. The tire does have that lip on the edges which makes it a tad wider so I'm expecting more water being thrown around since the rear fender piece does not cover it entirely but almost.
 
Installed yesterday the Bridgestones front and back 240/55/16-150/80/17 and definitely can say you need no modification on rear fender it has 1/8 or 3-4mm gap! Also I feel the bike can make thight U-turn on parking and much easier to leaning in turns! Price was 450$ for two tires plus 105$ installation I take wheels off the bike myself! Only one truck is front ABS sensor is space out from fork with thin washer don’t loose it or sensor will tach brake rotor! Will se how long it last in future my original tires 8000 miles!
 

Attachments

  • IMG_7241.jpeg
    IMG_7241.jpeg
    263.9 KB · Views: 38
  • IMG_7233.jpeg
    IMG_7233.jpeg
    196.2 KB · Views: 39
  • IMG_7234.jpeg
    IMG_7234.jpeg
    151.5 KB · Views: 39
  • IMG_7236.jpeg
    IMG_7236.jpeg
    111.8 KB · Views: 39
The new tires look really good. I'm wondering if you pick up some gravel will the rear be noisier. It may be needed to go back and space the fender out.
Maybe it will make noise will see in future but for now was trouble free! If I have to do it then I will think about spacers!
 
The new tires look really good. I'm wondering if you pick up some gravel will the rear be noisier. It may be needed to go back and space the fender out.
That and rain needs some room- I would recommend adding the spacers. It's very easy to do.
 
Last edited:
Installed yesterday the Bridgestones front and back 240/55/16-150/80/17 and definitely can say you need no modification on rear fender it has 1/8 or 3-4mm gap! Also I feel the bike can make thight U-turn on parking and much easier to leaning in turns! Price was 450$ for two tires plus 105$ installation I take wheels off the bike myself! Only one truck is front ABS sensor is space out from fork with thin washer don’t loose it or sensor will tach brake rotor! Will se how long it last in future my original tires 8000 miles!
That is close. I don't believe those will work with the rear Trik full coverage fender. Still waiting to try one under it if anyone has one to try a test fitting. Yeah, I'm not going back to the mud slinger.
 
This is a DIY install of the Exedra Max on the new 3R. It requires minor modifications to the forward most rear fender and, if doing it yourself, a tire stand and Mojo Lever - I'd say about a two beer rating for time/difficulty.

The result, in my opinion, is a less expensive tire that provides better performance, handling, and wear.
IMG_1261 2.jpeg

The Exedra Max has proven to be a very good tire on my ’11 Roadster. The Exedra goes for $200, as opposed to $312 (WTF?) for the Cobra Chrome at Rocky Mountain ATV. With an average of three tire changes/year this is a significant difference.

What you can expect: The Exedra is 1” taller, so you have to raise the fender on the front of the swing arm up an extra 1/2.”
* A couple of 1/2" spacers and a short piece of metal (thanks @Tal for the tip) was all that was needed to make the switch. So, the bike sits taller, but for me, with only a 30” inseam, it seems like it’s a couple of inches taller. This will provide you with more clearance (fewer peg drags) and, because the rake is changed, quicker handling that you’ll especially notice on the twisties.

*Edit- I was getting some whistling so I raised the fender up another 1/2" and it went away. So, raise the fender 1"

About the mounting....
Just 5 bolts and the wheel is off!

IMG_1246 2.jpeg


I use Motion Pro irons to break the beads- easy.
IMG_1245 2.jpeg



I've been using the Mojo Level on the Roadster and it works great on the 3R too. I balance using Marc Parnes' setup, but the 3R has a large hub opening and I need to see about getting some kind of adapter. This time I used Dyna Beads, but I really prefer the traditional method.

Speaking of wheel weights- there were a boat load of them on there from the factory to balance out the Cobra Chrome. I've never had to use that many weights.
IMG_1247 2.jpeg

The Cobras wore more on one side and this is what I had left at 3,150 miles....
IMG_1243 2.jpeg

The front also needs replacing and is cupping (my usual experience with Avons). It'll get changed before meeting up in Maggie Valley next weekend. I usually get about 4,000 from a tire on the Roadster, so I'm not sure if it's just the Chromes, or if the new bike is even more hungry for tires - I guess I'll know in the next 3-4K.
Hi, I would like to ask if I need to jack up the motorcycle when changing a wheel. I heard that it is not allowed to be lifted by placing the jack under the oil pan. So is it possible to place the jack somewhere else? Or do I need to hang up the motorcycle first at the front and then at the back?
 


Write your reply...
Back
Top