It should be the ones that open in the link - Black 45W 9 LED Chips
When you open the bucket, cut the stupid cable tie that keeps the cable inside the bucket, push the wires as far out as possible, connect the wire and kinda eyeball where the connector will fit best on the rear of the new light housing and slide it in there.
The first one took me 20ish minutes moving the wiring around to where it would all fit, the second one took 2-3 minutes total.
Here's a couple of photos of the Wiipro from Amazon ()
The second is the difference between stock and the wiipro. Not that good of a photo but gives you an idea. I adjusted the camera to expose for the stock HL on the right. You can see how much brighter the wiipro lamp on the left is, and how much whiter the light from it is.
Here's a couple of photos of the Wiipro from Amazon ()
The second is the difference between stock and the wiipro. Not that good of a photo but gives you an idea. I adjusted the camera to expose for the stock HL on the right. You can see how much brighter the wiipro lamp on the left is, and how much whiter the light from it is.
Only minor thing is they do not have parking lights. + you may have issues with high beam control light going on randomly (just the control light on the dash - the high beam itself works as it should). There is a thread about it somewhere here. I believe the issue with control light can be fixed.