Kuryakyn Black ISO Grips, for what it's worth

[mikemartin88]

Thanks, guys, I'll check the head bearings and hardware and let you know.

Mike

As usual, you guys on this forum were spot on. When I took it in for the 20K service, I told the stealership about the shimmy and they found the neck hardware loose. Re-torqued and she's solid as a rock again. Thanks all.

 

[cr0ft]

I fitted these up last Sunday and over the past to days im fkn impressed , i also have the throttle boss wich really helps as i get nerve pain from a dodgy back/neck , bars seem to have a bit more vibration due to not having end weights anymore but the grips are very comfy.

http://www.kuryakyn.com/products/2777/grip-end-weights

 

[martym52]

I put my ISO grips on and found a chrome plated spacer at True Value Hardware of all places! I also bought some 70MM long SS flat head Allen bolts and put the stock bar end dampers on. The spacers were 1/2" OD 1/4" ID X 3/4" Long, no problems thus far and the ISO's fit my big arthritic mitts pretty well.

 

[Troy]

I had the iOS grips on mine and loved them. That was until they warped to an oval shape. The throttle started dragging, so I had to force the grip slightly to throttle down. I now have the Avon grips. They feel more solid than they isos, but would not have changed without the warping problem.