Jerks when accelerating

[GasGasTon]

Good morning all
On my 2500 R, when I push the gears, between 4000 and 5000 rpm the engine jerks, as if the electronics were regulating, as if the engine ignition cuts out. The acceleration is well reduced for 1 second the time to reach 5000 rpm. It's annoying because it jerks on the bike and handlebars
After 5000 rpm, there are no more jerks, the acceleration becomes sustained again up to 6500 rpm.
No difference with or without Traction Control.
Do your bikes do the same?
Do you have an idea of the cause and how to solve the problem?

Good road to all

 

[Planet3]

Good morning all
On my 2500 R, when I push the gears, between 4000 and 5000 rpm the engine jerks, as if the electronics were regulating, as if the engine ignition cuts out. The acceleration is well reduced for 1 second the time to reach 5000 rpm. It's annoying because it jerks on the bike and handlebars
After 5000 rpm, there are no more jerks, the acceleration becomes sustained again up to 6500 rpm.
No difference with or without Traction Control.
Do your bikes do the same?
Do you have an idea of the cause and how to solve the problem?

Good road to all

Does it do it in all modes? Is it just full throttle? It sure sounds electrical. Coil maybe?

 

[idk]

Possibly the low tension leads on the coils need tightening.

 

[GasGasTon]

Problem solved:
A loose ignition coil terminal that was making poor contact, needed tightening
Planet3 and idk, you were right!
Fixed under warranty

Have good rides