HP Corse Custom Exhaust

[talkriver]

My mate fabricated joint pipe himself then installed HP Corse exhaust on his R3R as attached photo.
Since he didn't like its sound once he run the bike, he is considering extra modification right now.

 

[TURBO200R4]

nice
can he still change the tire when he has a flat

 

[talkriver]

nice
can he still change the tire when he has a flat

He says it's necessary to take off the pipes.
I heard the work required only 5 mins.

 

[idk]

He says it's necessary to take off the pipes.
I heard the work required only 5 mins.

With the correct tools carried on the bike, along with heat-resistant gloves?

 

[talkriver]

With the correct tools carried on the bike, along with heat-resistant gloves?

Cannot take off bolts with on-vehicle tool because those size don't match.
I guess it is better to use heat-resistant gloves, if the pipe is hot.

 

[Gregger]

That looks like a good place to stuff a turbo charger.... Any pics of the exhaust from the other side? Looks good.

 

[talkriver]

That looks like a good place to stuff a turbo charger.... Any pics of the exhaust from the other side? Looks good.

He uninstalled the exhaust pipes and is modifying them right now.
I would be able to get some pictures then upload here when he finished the modification.

 

[talkriver]

We can hear HP Corse exhaust pipe of the first post picture.

We would be able to watch another clip when he finished pipe modification.

 

[talkriver]

The mate has finished the exhaust pipe then installed.

He Added a motor valve to make less loud.

The motor valve allows to select two position i.e. fully open and a constant aperture. He set the constant aperture around 30% flow.
You can hear difference between them.

He also wrote Penner's map into ECU then rode. Seems to be satisfied with the performance.

 

[Vad_13]

Awesome job. I love it.