fastfun
Supercharged
Barbagris : you have some issues with the downshifting (Healtech) ? Which issue?
fastfun
Supercharged
And ? Raptor shift light is still working perfectly? I ask because I'm considering buying one.Thanks for the info. I just installed a Raptor Performance shift light and it works perfectly. Hopefully it will aid in making the 1-2 shift actually happen on time.
Claviger
Aspiring Student
- Joined
- Jul 25, 2014
- Messages
- 6,934
- Location
- Olympia Washington
- Ride
- '21 Z H2, '14 R3R, '02 Daytona 955i
Circling around to this post again, with my yellow > red > white sequence, I've not bounced off the limiter once, amazing improvement.
Zonechamp
Supercharged
Yep you bet. It's not as bright in full daylight as I thought it would be, but still easily seen. I wasn't really thinking this through when I ordered it. I didn't get the blue because blue at night is hard on my eyes, but I should have realized that it's never really on is it? It's not like a dash light that stares back at you all the time. Oh well, hind sight.
fastfun
Supercharged
I did order a blue one. I think one can better notice that colour in bright daylight /sunlight. At night I'm not driving at warpspeed.
How was the installing ? no additional issue to sort out?
How was the installing ? no additional issue to sort out?
Zonechamp
Supercharged
I did order a blue one. I think one can better notice that colour in bright daylight /sunlight. At night I'm not driving at warpspeed.
Nope, straight forward installation. Connect to the coil wire as pictured above. I glued the mount to the inside of my flyscreen so the light showes above my T-bars. I also wrapped the whole unit with electrical tape to keep water out. Works great.
fastfun
Supercharged
Ok,thanks!
fastfun
Supercharged
So I did get my Raptor shift light. however, while installing there is coming in some issue yet : as I did install before Whites performance coils, and there is Raptors warning not to connect the leads to the coils, there is coming in some issue...
I need to know the vehicles output speedsignal lead from the ECU and second, I need to know the tach output lead.
The electric part of the manual indicates 2 leads (blue and red one )leading from the ECU to the tacho and speedometer.
Now the big question : which leadcolor is the output one
I need to know the vehicles output speedsignal lead from the ECU and second, I need to know the tach output lead.The electric part of the manual indicates 2 leads (blue and red one )leading from the ECU to the tacho and speedometer.
Now the big question : which leadcolor is the output one
Zonechamp
Supercharged
So I did get my Raptor shift light. however, while installing there is coming in some issue yet : as I did install before Whites performance coils, and there is Raptors warning not to connect the leads to the coils, there is coming in some issue...
The electric part of the manual indicates 2 leads (blue and red one )leading from the ECU to the tacho and speedometer.
Now the big question : which leadcolor is the output one
Mine is attached to the coil and works fine. There isn't a direct tach output lead on a Canbus system, it's not the same as a old school distributor on a car.
fastfun
Supercharged
As I did install high performance coils, (Whites) , Raptor is warning for connecting its shiftlight to this type of coils.
Similar threads
