How to install Healtech Shiftlight Pro

[Claviger]

Really this is the easiest how to ever . Just want to show what wires work for the module.

Connect power and ground here on the headlight harness, Red shiftlight wire to yellow harness and black to black:

Connect RPM signal to coil wire of the same green with black tracer color on coil #2:

Profit:

One caveat, the RPM signal is half what it should be so your shift points in the software will be 1/2 what the engine is spinning at e.g. 3750 in the software is 7500 actual.

Enjoy!

Whole thing took longer to lift the tank than connect.

 

[Claviger]

Adjusted today to show solid yellow at 7K and flash red at 7500 then solid white at 8K. Makes shifting sooooo much better as I don’t have to even think about how close I am to redline on straight roads.

One of my favorite mods yet paired to a quickshifter, light blinks kick lever, done

 

[barbagris]

One of my favorite mods yet paired to a quickshifter, light blinks kick lever, done

Now try that downshifting

 

[1olbull]

Adjusted today to show solid yellow at 7K and flash red at 7500 then solid white at 8K. Makes shifting sooooo much better as I don’t have to even think about how close I am to redline on straight roads.
One of my favorite mods yet paired to a quickshifter, light blinks kick lever, done

Rob,
Seen this:
https://play.google.com/store/apps/details?id=com.HealTech.Shift_Light_Pro&hl=en

I watched this video - got everything straight in my head.
Sweet gadget!

 

[Claviger]

The Healtech brand items are really some next level devices. Not only are the devices good but so is the software for them, a rare convergence these days.

 

[barbagris]

@Claviger - But, Rob ------ If we catch you using those **** 3M type wire taps again - we will have to have a chat

.

 

[Claviger]

Lol. Ran out of positaps.

 

[1olbull]

Lol. Ran out of positaps.

I have some . . . and only a phone call away!

 

[Zonechamp]

Thanks for the info. I just installed a Raptor Performance shift light and it works perfectly. Hopefully it will aid in making the 1-2 shift actually happen on time.

 

[scot in exile]

Solder them wires together