help with rear cowl removal

edgeofsanity

.020 Over
Joined
Jul 13, 2024
Messages
45
Ride
2023 3r
I'm replacing my rear cowl w/ moto composit's carbon fiber cowl. I've removed all the bolts (circled in picture) and don't see any other bolts that need to come off. The tail seems to be attached to the rear light, but I don't see any screws/tabs. Has anyone here replaced their's; what am I missing? I don't want to break anything.

20241109_121543.jpg
 
Now you've got me thinking........
20 months ago I removed and refitted the trim cover about ten times and now I can't remember much about the actual details about how I did it, except I do remember that it was a bit of a challenge the first time I removed it.
It's a bit of a faff putting it back together also.
But... It's not what I would call an impossible task. No need to force it. If everything that needs to be unscrewed is done so, then it will lift off.
I seem to remember that the storage pocket needs to be removed ( I think it slots in to the top cowl) and I think also the black plastic 'under fender' (I think it hooks/inter-locks slightly with the top cowl)..........Don't fully take my word on that, because I can't remember too clearly, but at least have a look and consider what i've suggested.

I know it's not a huge help, but maybe better than saying nothing and scrolling past your thread.
 
After much frustration with removal of the rear cowl; finally got it all done. Tried to wrap the front fly screen but failed
 

Attachments

  • PhotoCollage_20241109_222741931.jpg
    PhotoCollage_20241109_222741931.jpg
    173.3 KB · Views: 32
  • PhotoCollage_20241109_222859783.jpg
    PhotoCollage_20241109_222859783.jpg
    271.5 KB · Views: 31
Back
Top