Help Needed!!!

[Dark_Element]

Originally K&N was fitted...Inam replacing with Stock...will it cause any issues? Nee tune settings needed?

 

[sonny]

Nope.

 

[Dark_Element]

 

[Dark_Element]

Bolt won't come off...soaked with Wd40...utterly frustrating...

 

[Dark_Element]

Nope.

Thanks man.... I'll let her run for 5 minutes...to adjust to new filter...

 

[Dark_Element]

Rlaced the connecter with insulated one...hope this solves a problem...

 

[Dark_Element]

Little damage...don't think it is a root cause...

 

[martym52]

Bolt won't come off...soaked with Wd40...utterly frustrating...

If you are replacing the brake pads only, just remove the Allen head cross bolts that go through the brake pads. There is no need to remove the complete caliper.

 

[Dark_Element]

If you are replacing the brake pads only, just remove the Allen head cross bolts that go through the brake pads. There is no need to remove the complete caliper.

Thanks Martym...I'll start with cross bolt

 

[Dark_Element]