Handlebar risers for Classic III

[chrisdouglas]

Rocket 3 Classic/Roadster bars are 7/8" aren't they?

not sure but I was told they are 1" - however I'll check with Triumph tech here in UK before I order the risers - thanks

 

[mully95]

not sure but I was told they are 1" - however I'll check with Triumph tech here in UK before I order the risers - thanks

I've always thought they was 7/8" but that could be wrong. Just didn't want anyone to order the wrong diameter risers at Rox and they not work. When you find out for sure post on here please. thanks.

 

[chrisdouglas]

I've always thought they was 7/8" but that could be wrong. Just didn't want anyone to order the wrong diameter risers at Rox and they not work. When you find out for sure post on here please. thanks.

Yep I will - its really informative on here

 

[mully95]

Just found this. Maybe another alternative.

Scootworks - Handlebar Risers for custom applications with 7/8" handlebars.


Wow.... ok by going by this chart our bars are 1"

Stock Motorcycle Handlebar Measurements, Cruisers

 

[Fingers]

Just take a wrench and put it over the handlebar the size that fits is the size .Should be 1" though.

 

[mully95]

Just take a wrench and put it over the handlebar the size that fits is the size .Should be 1" though.

I might have been getting confused because looking at bar end mirrors not long ago everything was pointing to 7/8" which more or less the inside diameter. Two different worlds in inside diameter and outside diameter.

 

[chrisdouglas]

Just found this. Maybe another alternative.

Scootworks - Handlebar Risers for custom applications with 7/8" handlebars.


Wow.... ok by going by this chart our bars are 1"

Stock Motorcycle Handlebar Measurements, Cruisers

Good chart - everyone says they are 1" but you know how bikers exaggerate - ha. I will still check though since they don't seperate out the tourer from our classic III

 

[chrisdouglas]

I had this reply from Rox speed about there risers -


Hello Chris~

With the way your speedo and tach are mounted, I just don't think our risers will bolt up on that bike. We have never had one in our shop to know for sure though, but from what I can tell, it looks like they will not work.

Thanks~

Ryan Jensen
Customer Relations and Sales Director
Rox Speed FX Inc.
37829 Rock Haven Rd.
Cohasset, MN 55721
www.roxspeedfx.com
218-326-1794


-----Original Message-----
From: Shopify Notification [mailto:mailer@shopify.com]
Sent: Friday, March 25, 2016 5:44 PM
To: sales@roxspeedfx.com
Subject: [Rox Speed FX] Contact Form from March 25 at 5:44PM

Contact Form Submission:

Name: Chris Douglas
Body: Hi I have a Triumph Rocket III classic [2010] will 4R-P2CC02 [2" chrome] fit my bike?
Also do you think I will have to change/extend any of the cables?
thx
Chris

 

[cr0ft]

I just don't think our risers will bolt up on that bike

Yeah, that's distinctly possible, I guess, my Touring has nothing there except the mounts for the bars, the instruments are on the tank.

However, I know of someone that tried mounting these on their Rocket, but I seem to recall he also monkeyed around with his instruments... paging @ro6ert - any input?

 

[ro6ert]

Yeah, that's distinctly possible, I guess, my Touring has nothing there except the mounts for the bars, the instruments are on the tank.

However, I know of someone that tried mounting these on their Rocket, but I seem to recall he also monkeyed around with his instruments... paging @ro6ert - any input?

I gave up, bought the rivcos instead. Fit really good. The Rox might work on a classic tho, I have the standard Rocket, 2007.