Ok great. This latest version of TuneEcu seemed pretty easy to copy paste. I'm trying to add Penners values to my 22 GT that has a 31249 map. I think I have the info that I need to try this out. Hopefully I won't have to call AAA and get a tow . Thanks for taking the time to answer my questions, much appreciated
If it loads ok and the bike runs, you probably won’t be calling AAA. Btw, you should be able to use the compare function with your new map and the Penner map you used and see no differences between the tables.
If it loads ok and the bike runs, you probably won’t be calling AAA. Btw, you should be able to use the compare function with your new map and the Penner map you used and see no differences between the tables.
I have found that rather than toggling back and forth with the "compare" option, its a lot easier to use another phone to take pictures of the map you want to copy and refer to the enlarged picture to see what your copying!!!
@Penner , reflashed my 2020 3GT/ comp werks with the 31013 full power map and Wowzers! Everything went so smoothly! Thanks to everyone who contributes but especially you Ulf!
This forum page made it easy. Can't say thank you enough. So many smiles...my cheeks were hurting. Muchos mahalos!
Hey guys, first time poster here! What a massive amount of info!! thanks to all that have contributed to unleashing this beast, especially @Penner.
Sorry if i have missed this, i have tried to search for an answer... In in NZ, got my 2021 GT new and its loaded with a 31017-2 OEM map. Before i make a mistake, can someone confirm the correct full power map? Im thinking the 31013. I dont want to stuff things up.
Hey guys, first time poster here! What a massive amount of info!! thanks to all that have contributed to unleashing this beast, especially @Penner.
Sorry if i have missed this, i have tried to search for an answer... In in NZ, got my 2021 GT new and its loaded with a 31017-2 OEM map. Before i make a mistake, can someone confirm the correct full power map? Im thinking the 31013. I dont want to stuff things up.
According to the TuneECU custom tunes page, you should be using the "All Markets Rocket GT No Restrictions 31012Map.hex" as the 31013 is the US/Canada map. Check your VIN matches on the page (Rocket 3 GT, from VIN 961597, Base map 31012, Standard exhaust, All markets unless a market specific calibration exists. Fuel up to E25. Minimum 91 RON (87 RON/MON) fuel): Custom Tune list
You also might want to search the thread, fairly sure the GT map has some of the throttle maps reversed?
According to the TuneECU custom tunes page, you should be using the "All Markets Rocket GT No Restrictions 31012Map.hex" as the 31013 is the US/Canada map. Check your VIN matches on the page (Rocket 3 GT, from VIN 961597, Base map 31012, Standard exhaust, All markets unless a market specific calibration exists. Fuel up to E25. Minimum 91 RON (87 RON/MON) fuel): Custom Tune list
You also might want to search the thread, fairly sure the GT map has some of the throttle maps reversed?
Hey guys, first time poster here! What a massive amount of info!! thanks to all that have contributed to unleashing this beast, especially @Penner.
Sorry if i have missed this, i have tried to search for an answer... In in NZ, got my 2021 GT new and its loaded with a 31017-2 OEM map. Before i make a mistake, can someone confirm the correct full power map? Im thinking the 31013. I dont want to stuff things up.
The 31017 map is for Argentina, Indonesia, and South Africa. Someone in NZ had this base map (maybe you). Anyway, you need to copy Penner tables into 31017 and load that. The Penner All Markets GT map 31012 has a sport table in rain mode. This is a mistake. From the Penner map, you need to copy all 3 F tables, etv3, and AFR. There are 4 etv3s. Remember to copy Penner’s etv3 into all 4 etv3’s in 31017.
The 31017 map is for Argentina, Indonesia, and South Africa. Someone in NZ had this base map (maybe you). Anyway, you need to copy Penner tables into 31017 and load that. The Penner All Markets GT map 31012 has a sport table in rain mode. This is a mistake. From the Penner map, you need to copy all 3 F tables, etv3, and AFR. There are 4 etv3s. Remember to copy Penner’s etv3 into all 4 etv3’s in 31017.
The trouble is there are alot of different oem maps. After installing the USA variant 31013, there were some abnormalities. Bike ran fine, was awesome I fact.. But there were issues within the dash. Once the copy and paste of the Penner tune over the 31017 oem tune was installed, those bugs went away.
Thank again for your help Dougl, bike went awesome over the weekend. What a difference