Engine mis

rocketme

Standard Bore
Joined
Jan 25, 2025
Messages
2
Ride
2012 roadster
Hey guys. I've had a minor but annoying mis develop. Absolutely fine from cold, once hot at low speed under light throttle it will be jerky momentarily then clear. Also at no throttle when idling it will mis intermittently and can be quite jerky when moving from a standstill. At higher throttle no problem. Bike is stock. Your thoughts please...
 
Could be a MAP sensor or ignition related issue e.g. spade connectors on coil inputs aren't tight, HT lead has developed tracking.
was there any work or anything done to the bike recently?
 
R-III-R Turbo said:
Could be a MAP sensor or ignition related issue e.g. spade connectors on coil inputs aren't tight, HT lead has developed tracking.
was there any work or anything done to the bike recently?
Click to expand...
No work done. Has just started out of the blue. If I am going up a hill about 30mph in say 4th and gradually roll throttle on it will mis momentarily then clear.
 
R-III-R Turbo said:
Could be a MAP sensor or ignition related issue e.g. spade connectors on coil inputs aren't tight, HT lead has developed tracking.
was there any work or anything done to the bike recently?
Click to expand...
I'd add in the TPS as a posibility. The spade connectors and quick easy to check and may be the fix.
 
You must log in or register to reply here.

Similar threads

Engine Axle Bolt in a bind during crash bar install
Replies
3
Views
614
Ishrub
Engine numbers
Replies
0
Views
348
Cushman
Engine color
Replies
8
Views
1K
ransan
I need serious help with "missing spark".......
Replies
8
Views
486
TURBO200R4
Engine cut out now possible rough running 2010 Roadster
2 3
Replies
22
Views
4K
Malcolm B
Menu
Log in
Register