Dyno skills - If they’re good does specific Rocket exp. matter?
- Thread starter Bondysbike
- Start date
-
- Tags
- dyno
Kevin frazier
Widowmaker!
He’s the guy that started that riding in lingerie trend.I would be worried about his lower half personally !
Great video and more of the Tabacco Motorwear Company vids here - Tobacco Motorwear
Kevin frazier
Widowmaker!
Lol ride on brother
TheKid
Top Fuel
- Joined
- Feb 2, 2011
- Messages
- 1,919
- Location
- Dry Ridge Ky, USA
- Ride
- 2007 Rocket III Standard /2010 R3T
If you have a choice of tuners, call all of them and get a feel
hoopla
Mained to ride!
For those of us that have PCV and AT, is the AT deactivated while tuning? I would presume it would have to be. Getting mine tuned this spring after putting on Paul's header. Chromed Header. Already had non stock cross over, Ram Air, and will have decatted stockers. May be PCV tuned or hoping for Tune ECU in Mass. Starting out with a tune for non stock headers,etc, suggested by @Clavinger. 20776 CES and Ram Air.
Hoopla
Hoopla
adelaideVMC
.060 Over
G’day mate, how goes it ? Saw u have DP shorties? Do u like? Wld u do them again? Cheers
Claviger
Aspiring Student
- Joined
- Jul 25, 2014
- Messages
- 6,934
- Location
- Olympia Washington
- Ride
- '21 Z H2, '14 R3R, '02 Daytona 955i
As Neville says, the skill set translates between engines.
It will be quicker if they're experienced on the specific bike.
Regarding AT, it should be disabled during a tuning session, and once fully tuned, there's not much need to turn it back on.
It will be quicker if they're experienced on the specific bike.
Regarding AT, it should be disabled during a tuning session, and once fully tuned, there's not much need to turn it back on.
Bondysbike
Turbocharged
I do now. I posted a while ago about my trials and tribulations with these. The PCV and AT made an enormous difference.
With out these having the DPs literally brought me to the point of nearly ripping them off and going back to stock. Suggesting the 12 min tune alone is all that’s needed as DP does is nonsense.
adelaideVMC
.060 Over
Ahhhh!!!
Thank you. Was wondering Hard abt that :-/
Pause for thought, before I went and lashed out in excitement, being a new R3 owner.
If all else failed / fails, I have ‘the man in the shed’ down the road from me ... but .... am Aussie Beer Tokens short right now, so have to do pipes only once, and getting it right wld be very preferable ...
Know of any choice pipe down each side, preferably stainless, bolt on systems that run without PCV and dyno etc etc tweaks ?
Ishrub
That's my name ....built like a truck
- Joined
- Feb 18, 2016
- Messages
- 8,956
- Location
- Duffy, Canberra, ACT, AUSTRALIA
- Ride
- 2x2010 ABS Roadsters, Sprint ST 1050 ABS, 3x250s
Apparently you can run Roadster mufflers on your earlier R3 . I think Paul Bryant said you can fit the LHS but need a simply modified/made bracket for RHS. The cross pipe can be any two pipe aftermaRKET CROSS PIPE FOR rOADSTERS OR the stock Roadster cross pipe.
You would still have CATs then though as Roadsters have them in the stock muffler cans and not the cross pipe despite it looking similar to the earlier R3 which does have CATs in the cross pipe but NOT the muffler cans.
You could get TORs for Roadsters without CATs but not cheap either 2nd hand and no longer available new.
You would still have CATs then though as Roadsters have them in the stock muffler cans and not the cross pipe despite it looking similar to the earlier R3 which does have CATs in the cross pipe but NOT the muffler cans.
You could get TORs for Roadsters without CATs but not cheap either 2nd hand and no longer available new.