Did the cam cover gasket, now I have a question for you gear heads ! :)

[Lifelong Biker]

Ok I did the cam cover gasket, and cover bolt seals! Went ok, had some help with a friend. After seeing this plastic air box idiotic set up. I have seen many posts about upgrading to the triple K & N filter set up. My question to you gear heads is, what about the MAF sensor and the other sensor in the stock intake manifold??? I know there are threads on this but I can find a straight answer. My bike has the T O R 's mufflers and local dealer did the map for them. Otherwise stock engine ! Thanks in advance!

 

[warp9.9]

Ok I did the cam cover gasket, and cover bolt seals! Went ok, had some help with a friend. After seeing this plastic air box idiotic set up. I have seen many posts about upgrading to the triple K & N filter set up. My question to you gear heads is, what about the MAF sensor and the other sensor in the stock intake manifold??? I know there are threads on this but I can find a straight answer. My bike has the T O R 's mufflers and local dealer did the map for them. Otherwise stock engine ! Thanks in advance!

the map sensor gets hung somewhere nice with a zip strip. all vacuum lines and electrical still hooked to it. (it was just mounted on the box). Now for the temp sensor it goes in a little filter and hung near the intake area. The ram air foam replacement filter has a place for the temp sensor so if you have not ordered anything yet you might want to consider their filter set up.

 

[Mittzy]

I would just go for the 2nd generation Ramair.

 

[Lifelong Biker]

Thanks for taking the time to reply !! I just watched a video on you tube showing the ramair installation! Great video, guy shows you step by step. I think I'm sold on the ramair! Too bad I didn't order it before putting bike all back together !! Ohh well I'll be an expert!!!

 

[Mittzy]

Thanks for taking the time to reply !! I just watched a video on you tube showing the ramair installation! Great video, guy shows you step by step. I think I'm sold on the ramair! Too bad I didn't order it before putting bike all back together !! Ohh well I'll be an expert!!!

Be sure it is a 2nd generation cos the first generation slip off and crack.

 

[Lifelong Biker]

Thanks for tip on 2nd generation also do I have to remap??? I had motor mapped by dealer when I installed the TORs!

 

[Mike188]

I would just go for the 2nd generation Ramair.

+1

 

[Mike188]

Thanks for tip on 2nd generation also do I have to remap??? I had motor mapped by dealer when I installed the TORs!

Would pay to have it dyno'ed after as TOR dealer tune will be lean, or speak to @HansO and he will be able to hook you up with a tune........

 

[idk]

Get the Ramair, and then ask @HansO nicely and he will send you a tune that you can install yourself with TuneECU. The dealer can only install OEM Triumph tunes, and they are not as good.

 

[Lifelong Biker]

Is the tune for an amateur to install or is it too complicated lol won't I need some sort of cables to go from computer to tune ecu ?