Coil Over Plug mod (COP) for standard coil removal

[Kevin frazier]

I never ended up attempting series, but, I cannot recall why at this point. I suspect my thoughts went something like
"Neville has done it and it worked in Parallel, so, let me not f this up experimenting when I know that works"...

Haven't had any issues with them since originally installed.

Curious to see if salt gets in towers with them.

 

[Claviger]

Salts going to get everywhere.

I just wanted clearly state that no one should batch fire for posterity, I don't think anyone was suggesting it. I've been down that road on a 4 cylinder, it sucks.

 

[Mongler07]

I guess i should have watched the whole video
i think that the video was probably about the installing coil over plugs (to replace the three coils that we have)
so he may have been putting just two coil over plugs for one cylinder.
sorry about my posting.

The video in a nut shell is just replacing the coils with individual over head packs, the part numbers and why it's better. Basically better spark because each coil has to do less work individually and the dumb spade connections are replaced with oem ford 2 wire style connections, the reason they work because the combined resistance is in spec.
That and how to install it and what not.

Resistance is direct related to the amp or watt draw thus of it's a replacment direct and sequential, it will not tax the system any harder.... i think. Im not 100% sure but from the knowledge i have and experience, it sounds right! I could be wrong though, im not an expert on electrical engineering or rocket ECM's

 

[Neville Lush]

I'm not an electronic engineer either, we did as described on several bikes, using 2002/3 coils and they are good. Even to 9000rpm.

 

[Mongler07]

I'm not an electronic engineer either, we did as described on several bikes, using 2002/3 coils and they are good. Even to 9000rpm.

9000 rpm... GOOD GOD!
I would love to hear that !

 

[Tripps]

I've hit 9200 on the over run, lol

 

[Mongler07]

I've hit 9200 on the over run, lol

i am assuming that to do that you need internals?!

 

[Tripps]

Yes, Carpenter package, pistons, cams, valves, porting, and especially the heavier valve springs.

 

[Mongler07]

Yes, Carpenter package, pistons, cams, valves, porting, and especially the heavier valve springs.

One day! I can only dream!

 

[Mongler07]

Let us know. This mod can be tricky - electrically at the edge of what the ECM can handle.

Just installed them, works flawlessly and i would say a bit smoother... IDK, my but dyno isnt very good.
I saved a few bucks and used a different part number but to find the same part.