Cheap air deflectors

[REGULATOR]

Ok so these may be a little ghetto , but these are the prototypes

couple minutes spent at the hardware store and for less then 12 bucks I have some air deflectors and enough materials to make more and experiment with size. ( kiss my Cheap A$$ Triumph!!)
again these are the prototype, wanted to see if I felt a difference before I started shaping and cutting holes etc., might add a second clamp etc

I looked everywhere for the Loom clamps that the Triumph deflectors used but couldn't find them so if you know where I can get a set let me know.. Let me know what you think, I will give a report on how they work and if they stop the buffeting, and if the wobble or anything ( I only used one clamp per side to try it out)

 

[REGULATOR]

they actually work, goint to see if I can make them longer and make a cut out for the turnsignal next

shoot for the money you can't beat it

 

[TurboFan]

Looks like a good job. One request. After you get some bugs and grime on them, shoot some more photos so we can see what you did! :lol:

 

[biker1059]

Regulator,
I can send you a cardboard pattern of the Triumph lowers if you like. I have them on my bike, like the way they fit around the blinkers. If you want the pattern just email me at biker1059@cablelynx.com.

 

[REGULATOR]

follow up.

apparently the way I drilled my holes wasn't too good, I did a 500 Plus mile blast this weekend at over triple digits most of the time ( heheh got to play tag with a couple Busa's around atlanta)


but anyway I cracked one of them.. I'm thinking I need to not only drill my hole better but use some sort of reinforcement to keep it from cracking.

I'll play some more and give feedback.