Bike pulls left

[HELBOY]

My bike has always pulled slightly left, very very little. Today had a new front tire installed. The same Metz 880 I've always had, now seems to pull much harder to the left. What could cause this????

 

[HansO]

have you tried making sure the wheels are aligned and the fork legs are set at same hieght, why not try a Avon Cobra or Dunlop Elite3 both have a much more neutral steering effect on bike they last longer grip and steer better the Metz are a crap tyre

 

[warp9.9]

My bike has always pulled slightly left, very very little. Today had a new front tire installed. The same Metz 880 I've always had, now seems to pull much harder to the left. What could cause this????

Hey bud I cannot remember but do you have the engine dresser bars on her? If so I bet the engine is a wee bit out of kilter from the install. Easy fix use a jack under the engine and loosen the front engine mount up and move the engine until the engine mount bolt goes through freely by hand the re-torque the engine mount.

 

[HELBOY]

Hey bud I cannot remember but do you have the engine dresser bars on her? If so I bet the engine is a wee bit out of kilter from the install. Easy fix use a jack under the engine and loosen the front engine mount up and move the engine until the engine mount bolt goes through freely by hand the re-torque the engine mount.

I have the RIVCO engine guard not the Triumph type. I have cruise on my bike so I do a fair amount of no hands riding, just required a little lean to compensate.

 

[HELBOY]

See engine guard here.

 

[idk]

Have you tried dressing to the right?

 

[warp9.9]

See engine guard here.

If they mount up to the front engine mount it could be your problem. Easy fix though.

 

[HELBOY]

If they mount up to the front engine mount it could be your problem. Easy fix though.

Thanks, I'll look it over and see what's up. Hope your better, thanks again...