Want to Buy Bear Claw

[barbagris]

OK - WANT is a strong word.

But I have a custom ITG filter to test and would rather not hack the original claw or the Oz-Claw that I use with the RAMAIR.

But I would rather not run it "naked".

UK / Europe preferred but it all depends on cost. It'll get sprayed once cut so matters not if it's a wee bit scruffy as I may well build in a knee-to-foam barrier.

Chris

PS - of course if anybody has one already cut for 2780's they don't want - that might do the job too. Same goes for a fibre one though I'm sure that'll be beyond what I'm prepared to pay (which right now CANNOT be a lot).

 

[cr0ft]

If no-one has a used one - http://www.worldoftriumph.com/trium...lock_01=&block_02=1000102-0-2&block_03=610500

 

[barbagris]

If no-one has a used one - http://www.worldoftriumph.com/trium...lock_01=&block_02=1000102-0-2&block_03=610500

That's exactly what I want to avoid. That's serious money for something that will get hacked about.

I've a mate who can make me a fibre one if I ask him nicely - and I will do so on Friday if he turns up for our "group" lunch. He generally enjoys "challenges".

 

[ozrider]

Chris, I have a stock steel one that has a few scratches on it that I used to make my mold off, you are welcome to have it..... just pay for post.

 

[barbagris]

Chris, I have a stock steel one that has a few scratches on it that I used to make my mold off, you are welcome to have it..... just pay for post.

Les - Fine Fellow! - That's great to know.

I'll see what Rafa says tomorrow about fibre. But if meantime you can get an estimate for postage - that would be appreciated.

 

[barbagris]

Les - Fine Fellow! - That's great to know.

I'll see what Rafa says tomorrow about fibre. But if meantime you can get an estimate for postage - that would be appreciated.

So - With luck I'll have a fibre cut away claw next week-ish.

Nontheless - interested to know what the post will be Les.

 

[albertaduke]

OK - WANT is a strong word.

But I have a custom ITG filter to test and would rather not hack the original claw or the Oz-Claw that I use with the RAMAIR.

But I would rather not run it "naked".

UK / Europe preferred but it all depends on cost. It'll get sprayed once cut so matters not if it's a wee bit scruffy as I may well build in a knee-to-foam barrier.

Chris

PS - of course if anybody has one already cut for 2780's they don't want - that might do the job too. Same goes for a fibre one though I'm sure that'll be beyond what I'm prepared to pay (which right now CANNOT be a lot).

might be too late but I have one full claw and one cut-out claw you're still looking????

 

[Wrecka]

http://www.geelongcarboncraft.com.au/products/Rocket-3-Throttle-Body-Cover%2d-Carbon-Fiber.html

 

[barbagris]

Wrecka - I'm not paying that sot of cash for something I'll cut.

albertaduke - send me some piccies please of the cut-away.

I may have a fibre one done already (but I cant make it to our "gathering" today).

But a metal one would (long term) be better I think. I have some 304 stainless steel welded mesh I would like to fit as an shield twixt knee and foam - be easier on metal base I think - Are you still planning to come over this way?

 

[albertaduke]

Wrecka - I'm not paying that sot of cash for something I'll cut.

albertaduke - send me some piccies please of the cut-away.

I may have a fibre one done already (but I cant make it to our "gathering" today).

But a metal one would (long term) be better I think. I have some 304 stainless steel welded mesh I would like to fit as an shield twixt knee and foam - be easier on metal base I think - Are you still planning to come over this way?

will do got to find it first , sold the house and movers packed everything so quick before I came back from a trip the garage was empty!!,, selling the cutaway for 40.00 plus shipping if you are interested and there must be a pic on the forum as I advertised it before
on for sale accessories .