Thanks Rick . Both yourself and Tal are using the same positioning without problem so your certainly doing something right . I will try to emulate your methods tomorrow and see how that goes ?I used the K&N 62-1340 breather filter and zip tied to the fuel rail between #1 & #2 filters.
Heat wall eh ? Well i have half a pallet of bricks in the back of my van . I get your thinking tho !Sadly - I concur.
@Nat67 - Have you built a heat wall twixt filters and the undertank area? - that'll keep the air behind teh big K&Ns cooler.
Those two 6mm holes line up with the mounts for the OEM plenum. The foiled fibreglass is not really necessary - but I have loads of the stuff.
maybe something other than a filter to cover the bulb end??...its just for protection...a cap off a drink bottle with holes or something???...i'm sure you will make something...
Stop sending me negative vibes man . If I break it now it will be your fault !
The ram air is just basic air cleaner foam. Like the foam in your lawn mower. It gets old quick and starts to fall apart. The K&Ns are made from layers of a cotton media. I have a K&N air cleaner in everything I own. I have an 83 Suburban that has had the same K&N for at least 10 years. I clean & lube them periodically. they will last forever if you take care of them. Better air flow and filtration that stock or the Ram Air.
just what k&n filters do you run?,will they fit under the oz claw?
