A Care Package from Oz

Waconut said:

I’m in Iowa and would love to join you guys for the burger and hear how the new system sounds

Click to expand...

JohnsoD said:

I would like to get a few of Midwest rockets for a ride. "IARocket" lives about a little over an hour South from me "Cav Man" a little over an hour North of me. I'm in Albert Lea.
It would be interesting to see how many we could get together. I would love to hear the OZ system myself.

Click to expand...

JohnsoD said:

I would like to get a few of Midwest rockets for a ride. "IARocket" lives about a little over an hour South from me "Cav Man" a little over an hour North of me. I'm in Albert Lea.
It would be interesting to see how many we could get together. I would love to hear the OZ system myself.

Click to expand...

• The stock O2 sensor does not want to come out of the factory pipe, I've been cranking on that sum***** with a spanner to no discernible effect. Appreciate any thoughts on more efficient or effective methods.
• The stock support brackets for the exhaust are a bit vestigial at this point. Can they come off without also getting rid of the passenger pegs?

Cav Man said:

OK, having got the stock exhaust (mostly) off, a couple of questions:

• The stock O2 sensor does not want to come out of the factory pipe, I've been cranking on that sum***** with a spanner to no discernible effect. Appreciate any thoughts on more efficient or effective methods.
• The stock support brackets for the exhaust are a bit vestigial at this point. Can they come off without also getting rid of the passenger pegs?

Appreciate any thoughts!

P.S. Those factory pipes and CAT are incredibly heavy, I'm thinking the Ozpipe will save me quite a bit of mass

Click to expand...

ozrider said:

Yes rear pegs and swingarm covers off as there is a bolt behind the cover also you can remove the seat and right side cover and follow the wires up to the connector and unplug it, might be easier to undo O2 sensor when the muffler is off
Hope that helps

Click to expand...

JohnsoD said:

I would like to get a few of Midwest rockets for a ride. "IARocket" lives about a little over an hour South from me "Cav Man" a little over an hour North of me. I'm in Albert Lea.
It would be interesting to see how many we could get together. I would love to hear the OZ system myself.

Click to expand...

Cav Man said:

Well, a few before and after photos of Huginn from stock to OzClaw and OzPipes- unfortunately the sun was in the wrong spot to get a good image of the pipes.

Power on acceleration is really there but quite a bit of decel popping, Had loaded Claviger's Ramair + CES tune into the ECU and will likely have to await the effects of the Auto Tune module to clean that up a bit for my situation, at least until I can find a dyno that will work with Rockets. Also noticed the engine light wouldn't go off, suspect that is because I disconnected and removed the stock O2 sensor in lieu of the O2 sensor that comes with Auto Tune but, if anyone has some alternative explanations, I'm all ears

Click to expand...

leatal said:

Looks really nice! Where did you get the short heat shield for the number three exhaust?

Click to expand...