2014 final drive

Bratty72 said:

Thanks the one I was getting got sold so I'm going to rebuild mine I've got the seal will check bearings when I open it up

Click to expand...

Doc Roc said:

I have part numbers for all the seals if that will help.

Click to expand...

Twattybob said:

Good morning Doc,
I own a 2017 R3Touring with a leaking seal on the final drive. Can you help me out with part numbers for a seal kit or whatever I need?
much appreciated!

Click to expand...

Mike Rocket said:

Is it possible to split the final drive unit to replace the seal, as i have seen somebody on you tube trying to do it and they failed to pull it apart even with a hydraulic puller.
They were a mechanic and i think they gave up. If you do get it apart can you tell us how you do it. It seems the makers make it as difficult as possible so you cannot fix it yourself.

Click to expand...

TURBO200R4 said:

i am in the process of working one one but it will be the last one i touch.

Click to expand...

TURBO200R4 said:

BUMP
just taught i would update this thread with i have learned.
if it is leaking that means that the bearings are wore out and a new seal will not stop the leak.
it has to have zero end play in the pinion gears that means if you stand the final drive up and you can put a screw driver in at the collar and pry if it moves at all the bearings are bad.
just info
the smaller (earlier) spline collar has a good grove/ring around the middle of the collar
and the ones with out the grove/ring has the larger spline and takes the larger spline drive shaft.
i am in the process of working one one but it will be the last one i touch.

Click to expand...