I couldn't leave well enough alone, so I just finished installing triple K&N's on my 2006 R3 standard. It also has TORS and Cat bypass as well as TuneBoy. I also physically removed the secondaries and the O2 sensor. I installed the Dynojet O2 sensor bypass. The tune I have loaded is the...
I just finished installing TORS, cat delete pipe, and TuneBoy on my '06 RIII standard. I also removed the O2 sensor, unchecked the O2 sensor box in TuneBoy, and for good measure I also installed the Dynojet O2 sensor delete. The bike gained a tremendous amount of top end power, bottom end...
I finally got the time to take my R3T to the dyno yesterday to see how the new Tuneboy tune was working. The results were pretty good, 110HP/140TQ. However the bike was running too lean (approaching 16:1), above 5000 RPMs.
I sent Wayne a copy of the dyno sheet and when I woke up this morning I...
I bought Jardine pipes and loaded the tune from tuneboy for Jars and triple filters. I unchecked the box for the O2 sensor in Tuneboy and unplugged it and have a check engine light.
Questions:
1. Do I need a O2 bypass/delete plug?
2. If the check engine light is on does that mean it is...
Finally got some time to put on a few miles since loading the latest Tuneboy tune for my R3T. All the riding I'd done before today was to 'test' the tunes. That consisted of many zero to 100 mph runs.
On my way out this morning I topped off the tank and quickly calculated that my 'testing' had...
Here are a few tunes for the R3T and a version of Tunedit to view them. Doesn't look like you can open them with an older version of Tunedit.
After you download it, click on the tunedit file and select extract. Then click on tunedit again to run the program.
Does anyone know if installing tuneboy voids your warranty, my dealer said it's pretty hard to void your warranty, but playing with the computer would, anyone had any experience with that? The owner never heard of tuneboy and they sound like the not really UP on this bike.
My dealer is 75 miles away and way to busy this time of year. Plus he charges $75 for a tune install..Is there any way to load factory triumph tunes myself?? Is the software and tunes available to do it myself. A tuneboy is in my future and is the best way to go but after installing tors, a...
I have an 07 r3 classic, D&D exhaust, PClll, stock intake filters. I put the D&D tune in from PClll but it says D&D exhaust,air box eliminated, and K&N individual filters. First through 3rd is all good through the entire rpm range, 4th and 5th is good in higher rpm range, 3250 and up, one...
I am trying to hook up my bike with a new laptop that uses windows vista. I think the problem maybe with the drivers but it does nothing when plugged in. I have uninstalled everything and reinstalled with no success. Any help or advice would be appreciated. I'm using the latest download from...
In my brief experience here I have been both enlightened and confused. All have been most willing to help with my newbie questions. My question is has anyone modified the A/F tables to keep the engine in open loop at all times as opposed to deleting the O2 sensor and what was the result?
Found a tuneboy, slightly used, less than 150 miles, I need somekind of CPU code???? or ECU, I know what that is. do I need somekinda code to unlock??? open?? to use it? where do I get it?? does it cost$$$ ??? anyone help me here??
Thanks
Gonna be putting on D & D pipes, 3: 1: 2: What would be the best triumph tune to install?? should I change underseat filter to K&N??? Wanna keep the best fuel mileage also.
Thanks
Hey all, after a try or two, I think I was able to download the 20050_2 tune in the old girl. Well, at least she ran when I took her out for a spin, & seemed pretty spunky, but she always does.
Here's the question: It states that it will take about 3 to 5 minutes to download the tune the...
Hi, I am new here. Been reading about the decel popping and need some learning. Have 08 Classic with TORS and bypass. No experience with other Rockets. At 2000-2800 rpm range at steady throttle on flat road the engine will suddenly run rough and pop. A slight increase or decrease in throttle...
Good Morning All.. I just installed a set of tor's on my 07 R3 classic. Now I didn't remove the factory Cat box, will I need a different tune... :confused: Also for the money what would the best buy a Tune boy or a PCIII and where would I look to buy one...
hey folks,
seems the previous thread on this topic has disappeared. to where, i've no idea. my prior discussions with Paul has lent itself to the possibility that a palm-held may have the capability of loading tunes via tune-boy. any further thoughts on this?
greg
OK, I spent about 6 hours today dyno tuning my IC SC R3 with the new headers on it... and I'm only half way done. I'm actually learning to do the tuning (doing the step tests and fuel changes myself) under the watchful tutelage of our trained tuner. Naturally, my learning process adds to the...