tune

Have had my 05 only about 6 months. It runs perfect in every way except at low speed, low rpm. If I was cruising the neighborhood at, say 12 or 1300 rpm in second gear it will surge slightly. Have tried FI cleaner, since it only has 9800 miles. Thought maybe lots of sitting unused by the...

I'm thinking about putting an exhaust system on. Does anyone near me have a tuner that they would help me tune my bike with? I'm out of owensboro, ky. I am still confused by the tuning stuff. I just wouldn't feel comfortable doing it myself...

If I put a straight exhaust on with no modification to the air intake system except for under tank filter mod will the 12 min tune be enough? I really don't want to have to get into trying to tune with a program by myself... I'm not very computer savvy.

Hello all, I have the dreaded high idle/TPS issue. I have the Tune ECU cable and the new TPS part ready to be installed, but I have a question or two before I start. Using the Tune ECU software, can I only install the proper tune into the ECU after installing the new TPS? I have the K&N pod...

All, I received a tuneecu map from Hanso to get an 80% solution to my setup of triple K&Ns and a Carpenter exhaust, but both he and Wayne Tripp, the creator of the Jardine/K&N tune on my bike at the moment, told me that it is nowhere near optimal. Does anyone else run this setup with...

Hello folks. I'm looking for someone in either the Richmond, or Tidewater area that has a good working knowledge of Tune ECU and can both install and uninstall a Power Commader in their sleep. My story is both long and sad, but I need to get my bike right and it's going to fall on me to do it as...

Hi, I have a 2011 R3 Roadster. The aftermarket TORs exhaust should be arriving today, and I'll have it installed by this evening. I won't be doing anything to the catbox, etc. Any recommended tunes? The last six digits of my VIN are 473885. Would you recommend 20355? THANKS :)

Hi, This is related to my previous thread. The TORs are on the way, and I need to get the ECU tuned properly. There is a ton of information on this board, so chances are I’ll do it myself. But, I did call the local dealership who stated it would be $90. Does that sound like a fair...

This may be an ignorant question, but why do you have to use a new "tune" when you change your exhaust system?

I am having trouble getting my tune ECU working. My old cable was mistreated , so I replaced it with one from Amazon.com. still could not get it to work so found and loaded the 2.5 version. now the red light blinks and says to check cable connection & turn off key. do I need to reload the...

I currently have a PCV with an AT installed on my bike. The PCV is loaded with a 0 map, so (theoretically) it should not be modifying my fueling. I have loaded at least 3 different tunes on my ECU, each with appropriate configurations for my bike. I would expect some trims, perhaps some...

First performance mod... :) Just purchased new in the box TOR silencers from a fellow member and have a couple questions. Only performance changes I'll likely make are the silencers and eventually the cross over pipe. I like the look of the stock exhaust manifold so will likely never change...

I wanted to give the Forum Members some information about the Dobeck Performance AFR Plus I recently installed on my 2006 Standard Rocket III. This add-on performance enhancement system is a plug and play devise that controls the fuel system at the injectors. No computers or dyno tuning is...

Hi all, I know there is a LOT of discussion on TuneECU. Because of that I want to clarify some things for myself. R3T comments only please, I confuse easily:D 1. Is the Crescent Technologies cable on Amazon the preferred cable? 2. I have Windows VISTA on my 64 bit laptop. Any...

So I would like to run the tune PowerTripp posted for the R3T, but I have already done the triple K&N mod. My understanding is that this will cause things to run lean a bit. I have a PCV/AutoTune installed to cover that aspect of things with my current setup. I figure that if I can copy the...

I don't trust myself to download a tune. I don't have laptop or cable and am not computer savvy. Is there anyone in DFW area that would be willing to down load a tune on my Rocket touring bike. I live 70 miles north of Dallas and could bring bike to you. I would be glad to pay for your time and...

Anyone got a Tuneboy cable i can lend,hire or buy or if your local to me get together with,im in Warminster Wilts,cheers.

So I have some D&D pipes on my 08 Touring with the K&N drop-in filter. Would it be OK or DAMAGING to my engine if I put on the stock pipes at home and rode 15 miles to the dealer to have it re-flashed?:confused: I know it'll run funny but that's fine, it's not too far. I just don't want...

I can't get the AT working, no matter what I do the AF number stays at 9.99. Have Checked all the wiring and voltage, no problem there but I never ticked the temp box when turning on and configuring the AT, is that right.

After my initial tune - I wasnt completely satisfied with the outcome.... But NOW - WHOOHOO!!! Giddyup... The fist time Fred looked at the R3 he was pressed for time and there was a minor mechanical hiccup (My Cruise control cable was holding the idle up:mad:) So not at all Freds fault.:)...