switch

Recent contents Top users
  1. Rockhard

    Kill Switch problems on 07 R3

    Looking for guidance from anyone who has had problems with their switch. I have an 07 R3 with 110,000 klms which recently has developed a problem with the kill switch, ie. it turns itself on? I have pulled it apart and cleaned all contact points but the problem still exists? Thinking about...
  2. Kevin frazier

    Key switch WIRING LOOM

    On a Touring Model, the key switch wiring loom is covered by a piece of plastic that cracks as it ages, mine 08, and the way this loom bends over frame to get to main wiring loom, it rubs in several spots and the cracking sheath and wires rubbing frame not good. look at yours or not. 😬 and while...
  3. Journeyman

    How to remove ignition switch from Roadster?

    My switch is going bad and I need to quit putting off the repair. I suspect that one or more wires have come loose or are loose and just barely making enough contact (most of the time). My question is what's involved in getting the switch out? I know that I'll be running into some bolts with...

  4. Keyless Ignition and Key switch elimination

    Hey All, Does anyone know if the key switch can be eliminated if a keyless ignition is installed? Thanks, jojo
  5. Thedoctorr

    Clutch Switch Removal

    Hi All This is my 1st rocket in my 23 bikes owned over many many years. I have searched tirelessly through the service manual on how to take out the clutch switch but nothing on how this is done. Can anyone tell me how to do this please. regards Neil
  6. albertaduke

    Master switch on 2020 and up

    as I brought my bike to the dealership for the first warranty inspection I wanted an answer on something found in the user's manuel namely on page 65 it state the master switch on.off is located on the left side etc etc... and it state clearly "required only in canada and the US" this manual...
  7. 2014 Ride

    Starter Switch

    Has anyone any Pics or Vidio of how to change or ckesn Starter Switch

  8. Clutch switch problem

    Bike, 2020gt with 10grand, threw an engine code. Was running rough, and would quit coming to a light. Dealer diagnosis said it was clutch switch, which apparently causes the brain to need lobotomization. The clutch switch is located under the clutch lever and is vulnerable to damage from...
  9. mlindsay

    Keep hitting the high beam switch

    I notice I am constantly hitting the high beam switch when using the clutch on my R3 R. If my pinky is bumping up against the outside edge of the lever, there is less than 1/2" clearance between my gloved hand and the high beam switch. Is there any adjustment to that switch location? Any...
  10. Micksan

    Relay ignition switch kit.

    I decided to get the 2014Tourer. I had problems with a 05 ignition switch. Had to install a relay kit from Japan. The name was Beaver something. Need some help tracking him down. Also if anyone can lead me to a new/ used workshop manual I would appreciate that. Not a big fan of the download...
  11. DarkRocket

    side stand switch wiring

    A strange thing indeed. My side stand switch has been occasionally playing up, so I have decided to by pass it. You can't take the old switch off without cutting the cable which isn't really a problem as it is defective anyway. Also, you have to take the side stand itself off and the rubber...
  12. r3badboy

    Roadster ignition switch

    Howdy guys, after an ignition switch (with wires & plug) for a 2010 american import roadster....well thats what comes up on the ecu vin that I bought. Seems to be different part numbers for different models so dont know how compatible they could be? New one a tad expensive, but thought I'd put...
  13. TexasCoyote

    Clutch Switch Cleanup

    I was having issues with my 2012 Rocket 3 intermittently starting. That is a sinking feeling when you are miles from home, no cell signal and the nearest service station is farther than you want to walk. I don't really care to leave her by herself either. I finally figured out I was able to...
  14. PWGR3

    Is this the ignition switch issue?

    So when i first got my 07 classic in 16, everything worked. Eventually the odo stopped working and found it was a common issue; didn't think much else of it. Eventually the sweep stopped with key on, but would sweep when i tapped the start button. I removed the pc3 and put a tune on it with...
  15. sonnie

    On/Off Switch 2020 GT.

    My local Triumph dealer says to leave the On/Off switch on the left side under the tank in the ON position all the time, and never turn it off. They say Triumph recommends this. WHY did they put that switch on the bike if it was never intended to be used as a switch. I don't know if its only on...

  16. 3d printed ignition switch bracket

    Made an extension harness and went to relocate my ignition switch. Still making a few different models but I'm getting better!
  17. nickneale

    Datatool 3 anti-tamper switch under tank

    Hi, After a couple of chats with Scorpion (I guess they own Datatool now) it appears my sensor is faulty, as I find it difficult to dis-arm, and impossible to get into Service mode. I'm planning on removing the alarm, but have a question before I start annoying the neighbours.... Can somebody...
  18. ody2002

    Master Ignition Switch

    Hi all, new rocket owner here and I'm very pleased with the bike. It's definitely a revelation. I had a few questions regarding the master ignition switch (US specced bike). The dealer told me to leave the master ignition switch ON all the time, as it would drain the battery otherwise (this...
  19. maurice

    On Off Switch left side 2020 r3

    When I was ordering my bags yesterday, the service guy came out to tell me a few things on the new bike. He said many people complain about hard starting. Said leave the on off switch ON all the time. Factory told him to tell everyone this, as turning it off causes problems with breaking the...
  20. Kevin frazier

    Clutch switch movement

    Does your clutch switch on your touring have about 2.5mm of free play where it can be pushed in and out. Pictures below out is normal position but i can push mine in to stop which is 2.5mm. I’m wondering if my clutch switch is starting to go bad and this free play is a sign of a switch thats...
Back
Top