r3t

So I'm having a problem with my bike misfiring when it gets hot, it's fine for the first half hour, and seems to get worse when it rains, though that could be a red herring. If you let it cool off it seems to be ok for a while. Last time I was out it got bad enough that one cylinder wasn't...

In very good condition. They do have light scuffs. Gaskets included $225 plus $70 shipping to lower 48.

I'd like to buy TORS for R3T. I have a set of originals to get rid

R3T complete headlight or just the ring and/or springs. The same rings fit a few Triumphs including: R3 Touring America Carb and EFI up to 468389 Speedmaster Carb and EFI up to 469049 Thunderbird LT #6 in image below, I will buy #7 the springs too if you have them spare.

SWMBO wants the backrest pad raising around 2 inches to stop her back aching under acceleration. I have NO intention of reducing the throttle position, so need advice on raising the height of the "quick release" backrest on my 2012 R3T please.

New to Rocket family. Love this bike, best bike I have ever ridden and am still learning more about the bike as I go. So I have slight oil residue on left rear side of engine, looks like source could be coming from up by tank. Have not had services done yet as there is only two authorized...

Yep its me, one of your local (sort of) Rag and Bone men SEEKING bits and pieces not for nefarious reasons but to possibly restore this now fading beauty who flopped over at her 21st like many before her;):D She had just turned 21,121 miles before taking a extended rest.;):D I opened me gob in...

Looking to buy a solo or 2-piece seatpan for my '15 Touring. I'm wantin' to have a custom seat made, but Russell needs a seatpan, and if I'm gonna do it, I'm gonna do it as the 2-piece seat. If you have a seat that's all scuffed up, or ripped, and you think nobody will buy it, I will. I just...

Update NOTE: Replacement is now found! Funny thing happened on the way to work today, my right fog light caught a rock. Does anyone have a fog light they want to party ways with?

So as I stated in my other thread my signals stopped working Saturday. Tonight I Checked the bulbs OK Checked the fuse OK (Brake light and horn are on same fuse and work) Got out the manual and stared working through the circuit. It seems whatever controls the indicators is in the...

Looking for the solo seat rack fixing brackets. There are none anywhere in the USA. My mate in the UK came up with a blank too. I have the rack and the hardware. If anyone has a drawing of them I will have them made.

I have read where the foot rails can be replaced on some rockets with those of a different model in order to increase the lean angle before the floorboards/rails touch the ground. Can this be done on the R3T? If so, which one? I have a 2014 R3T.

Just traded my 15 Scout for a gorgeous 09 R3T in 2 tone blue. Rides and handles great! Just cracked 8000 miles today. What a beast!! It has a set of TOR's on it and a 120hp tune. I have the ram air kit but have not installed it yet. Looking forward to many miles on this beauty!! Thanks for the...

Newbie to the Rocket community, recently invested in a 2012 Rocket 3 Touring. Decided the B-King was too lively for my aging capabilities and that I should try to be a little more sedate, hence the move to a cruiser, never ridden a cruiser before, looking forward to long lazy trips out in the...

If your sitting in the bike it would be the left hand side. I broke the bottom ear off when it fell off my bench. Several attempts to glue it have come up short.

Look what I found.... Chicago Crapslist...

Finally got around to installing a handlebar from a Valkyrie on my ‘13 Touring. World of difference for my moderate sub-6 foot stature. The bar is about 1” narrower on each side so it doesn’t pull away from my grip in slow speed turns. Road a couple hundred miles today on curvy mountain roads...

Hi guys. I finally got around to ordering and installing a Utopia back rest. It didn't take too long and its pretty straight forward. You will want to have a staple puller to get the seat cover off and a pneumatic or electric staple gun to put it back on.

Looking for a set of stock R3T handlebar risers with hardware. Saw a set on eBay with no hardware and another with some damage. Thanks

Longshot here bit I need a R3T drivers backrest post. I actually have a new Triumph pad and backing plate but just lack the actual post and hardware. I thought just maybe someone has a junk backrest with a salvageable post. Thanks!