1. buddazero

    Looking for Tail Light...

    Hey beautiful people! Need some help if at all possible. I'm looking for the Tail Light / 12V Switched Power Source", which I suspect are the same. I have the Scorpio 900 Alarm System, so far I got the positive and negative wires connected, and next I need to connect another wire to the 12V...
  2. mexican

    check engine light after a jump??

    Battery was too low to start the bike, used a jumper box and now check engine light is on, it does not seem to cause any trouble but light is there, what cold have caused it,?:unsure:
  3. AJ1

    LED light bar

    Currently I have LED headlights which draw 90W (45Wx2) and Rigid LED spot lights that draw 94W (47x2). I am thinking of adding a LED light bar. What's the max wattage I can add?. Will a 310W light kill the battery ?:( . I will be using dedicated switch, relay and fuse for the light bar. All the...
  4. LAS VEGAS DAVE

    CLEARING CHECK ENGINE LIGHT

    This morning my 2015 Rocket 3 Touring wouldn't start, the battery was real low, I haven't started the bike for 5 or 6 weeks. It was cold out this morning but later when it was warmer it started it. I rode it about two miles and the check engine light came on. I am trickle charging the battery...
  5. Shorty05

    Oil warning light staying on

    Recently fitted a phone mount on handlebars which had a USB port to charge phone. Removed instrument panel from fuel tank and lifted fuel tank to route wiring to battery. Everything went fine until I turned on ignition to check everything worked OK. Lights came on reset the clock then started...
  6. ve1rfb

    rear brake light switch

    good evening all, still in LOVE with my 07 :) but I noticed I have no light activation with I apply my rear brake. pretty sure it's the pressure switch, and I"m wondering if there is an 'aftermarket' part that people are using, or is this pretty much a dealer only expensive part?? for right...
  7. Son_Of_Dog

    Want to Buy Mirrors, Dresser Bars, potentially more...

    Laid the skunk down last Friday, was lucky enough to get away with just cosmetic damage. The list of stuff I'm currently looking for leads on is as follows: (08 R3T) Mirrors Front dresser bars Rear dresser bars Front fender embellisher Front signal light lenses Panniers or repairs to...
  8. vindex1963

    No tail light, no license plate light

    The rest of my lighting works fine. Replaced bulbs, removed side cover and checked the yellow/black wires and plug. Pulled the plug apart and plugged it back in. Fuse #10 is fine. (see I searched!!) I removed the small parking light bulbs from the headlight when I added the LED headlight so I...
  9. Tazithman

    Haunted check engine light

    Check engine light comes on and goes off without rhyme or reason. Sometimes it will stay on for days, sometimes it randomly flashes off and on while riding, and sometimes it clears itself to come back a few days later. This has been happening for a month and I've attempted checking for error...
  10. 2006 Rocket rear running light

    Can any of you guys advise me on how to replace the rear running light. Tnx
  11. ToledoBendTom

    Noticed engine light on help with diagnostic

    Haven’t opened the manual yet, so if a decision tree is in there forgive me, wanted group input anyway. Last ride no issues, set a week, started it and saw orange engine light and shut off. So, my thoughts Check engine oil and radiator fluid levels. Assuming there is an error code, is there...
  12. dustyroad

    Want to Buy Auxillary Light Visors

    Well got a bit of damage to the visors via a bird. Found the 7" and now trying to replace the smaller visors. I believe the part number is A9738068. Most likely need to be some one that does not have use for theirs. Please let me know if you desire to part with yours. Dusty
  13. Jwjhoover

    Signal Light Flasher OEM or compatible

    My signal lights have stopped working, so I am assuming it's the flasher relay. The one I have appears to be an aftermarket part that I can't seem to find a replacement for, so I would appreciate if some of you can suggest a compatible flasher for a 08 Classic. I'm in Canada, so something in...
  14. Ishrub

    Fixing stuff - BONDIC light activated plastic filler / adhesive

    Anybody seen or tried this BONDIC or similar before, I thought it may come in handy for repairs and patches. Not sure how hard or load bearing the clear plastic will be or if it is just a soft flexible cover/fill. Will read up now. Watched the so called 'How srtrong is Bondic?' stupidity video...
  15. TriumphR3Newb

    Triumph fog/driving light bulb replacement

    I think I know the answer to this but I gotta ask anyway. I am changing the bulbs in my Triumph fog lights, you know the H3 bulbs with the little pigtail. I took the back off the the light (see my other post where I screwed that up) and pulled out the bulb. Now I want to confirm that I have to...
  16. Boog

    **Found** Fog light R3T

    Update NOTE: Replacement is now found! Funny thing happened on the way to work today, my right fog light caught a rock. Does anyone have a fog light they want to party ways with?
  17. HIM57

    Still rear light / number plate light woes

    I have detached everything except the number plate light which only has 2 wires (red and black) I have connected to the yellow and black on the bike harness side and still no number plate light (red to yellow black to black) If I go direct to the battery - light works fine. If I connect the...
  18. HIM57

    No rear light or brake - headligh dim when braking

    Once again - I have am electrical issue. Sometime ago - I did fit a LED rear / inicator light and relay which worked . At the weelend I added the Ram air filter. Took her out for a spin and seemed well in the world. Until I noticed no rear light either running or braking - no number plate...
  19. HIM57

    Ram Air Filter installed - now engine light on

    Hi, Just installed the Ram Air Filter. Did the 24 minute recomended tune with zero throttle. Now I have a check egine light. Any input appreciated.
  20. sonny

    light at the end of the tunnel

    Just got home at 3:00 am. Gonna drink a few beers and enjoy the next three days off working on the bike. Might even get it running again. Tires on there way in. Stepper motor and new hoses for the throttle body on there way in. After reading up on it and having the man in the tin shed say you...
Back
Top