1. Dawg68

    New LED Spot Lights F4 Hyper

    Good day all; A couple of days ago I ordered a set of auxiliary lights for my R3R. Here are the specs; F4 Hyper Features • 100% optically clear PMMA LEXAN lens • Instant on/off, no warm-up • Operating Temp: -40 ~ + 145 deg. • Oversize heat sink • Low power consumption, Over/Under Voltage...
  2. LED Indicators

    Hi all, New to the site and my first post on here, so be gentle with me :) I have just bought some LED indicators for my Rocket.....along with a flasher unit to solve the rapid blinking if needed. The main idea is to free up the back mud guard to expose more of the lovely big back tyre.....I...
  3. 1BigDog

    Wanted: someone who installed the Rivco risers on the R3T

    I just bought a set of Rivco risers and have some clutch cable questions. The instructions say to remove the clutch cable from the handlebar lever and re-route the cable but I dont see where this would work without first disconnecting the cable from the lever down below, alongside the engine...
  4. Pulled the trigger...

    Got a Phantom Black (with red racing stripe) 2014 Rocket Roadster last week! Now to start accessorizing ;-)
  5. skydog1000

    StrobeWise The Original (6 LED Amber Light)

    Has any one tried this LED tail light StrobeWise The Original (6 LED Amber Light)
  6. Jim/Maine

    LED light addition-small but powerful

    MANY THANKS TO C.W. LIGHTING R+D (BARBAGRIS) FOR THESE VERY COOL... ER, HOT, LIGHTS. MOUNTED WHERE THE PLASTIC HORN COVER ATTACHED -- YOU CAN SEE BY THE PICTURES THEY ARE BRIGHT! FIRST LIGHTED PICTURE IS WITH S.W. SPEAKER LED'S ON HIGH BEAM, SECOND ON LOW BEAM. FEBRUARY IN MAINE, 15 DEGREES...
  7. canadiancopper2014

    LED Lights

    Good day folks, I'm will be pulling the pin on new headlights on my 2010 Touring. I will be going the route of the Phase 7 Headlight as well as the 4 1/2 passing lamps by Kuryakyn. Has anyone here have the same set-up and if so, was it a clean install (plug and play) Lastly, would a H4...
  8. MCN

    Built in Britain winners unveiled

    Motorcycle Live saw the grand finale of Built in Britain with Carole Nash, as the ultimate winners were unveiled and prizes awarded by Carole Nash’s Ambassador SBK star Jonathan Rea. It was third time lucky for Lincolnshire’s Gavin Clarke whose 1979 Honda CX500 scooped the top amateur prize. His...
  9. alarm led

    hi everyone, this may seam an odd question but is there away to make the alarm led in the instrument panel flash so as it looks like the bike is alarmed ? my general experience with alarms is that there a PITA as I have found with my v rod waking the house up all times of the night (my daughters...
  10. wordwarrior

    Just stumbled in....

    Just about to trade in my trusty BMW R1200 GS for a 2011 rocket 3 roadster. More excited than a kid at Christmas! Get it on Monday coz work prevents me from getting it any earlier despite it being ready to collect :( Is it Monday yet? A new era for an old bloke who doesn't know when to give up...
  11. Roadster Accessories

    Roadster Accessories

    Rivco Risers moved the bars up approx one inch and back approx two inches. Long rides on original placement gave me a pain in my back and sore arms. The new placement is perfect for me.
  12. Roadster Accessories

    Roadster Accessories

    I think I got her dressed up the way I want her now: Rivco Risers Rivco Turn Signal Mirrors Triumph Windscreen Triumph Heated Grips Triumph Engine Bars Triumph Pegs Corbin Beetle Bags Triumph Tall Sissy Bar Triumph Luggage Rack Custom Dynamics License Plate Turn & Brake LED
  13. barbagris

    LED H4 "Bulb Replacements" that might stand a chance

    So here I am - dismantling an Audi LED headlight salvaging parts to try and make a decent H4 LED bulb and I decide to have a look on Ebay and see what the Chinese are up to - Found this Now it's early days - and there are few alternatives of this type - but the reason I think they have a...
  14. RanDom_Chipmunk

    Thrilled and terrified!

    So, I've been riding a few years, and lo and behold, I've just inherited a 2008 Rocket III from my dad who can no longer ride.:roll: That is awesome, even though it has been sitting long enough that I have to replace almost all the seals and fuel lines. the scary part is that I am 5' 1/2" tall...
  15. R3Tex

    LED Headlights

    I know there are several threads going around about LED headlights, but I thought I would throw another one in the mix. I installed HD Daymakers on my Roadster tonight. It was a no pain, no strain install. No trimming, no relocating brackets, I even kept the parking lamps LOL. Here's what I...
  16. For Sale Stock 2013 R3 Roadster Exhaust - Drilled out

    Hey all, I ended up doing the cut out mod on the stock exhaust on my '13 R3R, but it wasn't loud enough for me, so I didn't end up doing all the "clean-up" polishing or internal painting to make it look great. The exterior is still fine, minus a VERY small nick on the very bottom of one of the...
  17. Boudreaux

    Dealer Called Today!!!!!

    The Dealer called me today. He said I can pick up me New R3R Friday. I will be going to New Orleans as soon as I get off of work. I cant wait!!! I am already conversing with Ric at Reband. Gonna get that Reband Short Pipe. Its gonna be a Beast!!! KennyB
  18. BIKER

    LED HEADLIGHTS..

    has any one put them in yet.. I have a R3T and have found a one I think will work ..but OMG the price ..I am looking at one because my HID just took a dump.. this is the one I am looking at http://www.jwspeaker.com/products/headlights/model-8700-evolution-7-round-par-56-led-headlight and this...
  19. rocket51

    Finally installed 130/90/16 front tire

    Just put on my 130/90/16 tire today and my bike handles so much better in turns now. I am looking forward to racking up some miles with new tire. The tire is a Michelin Commander.
  20. CanberraR3

    LED indicator bulbs

    Apologies to all those who already know this but as I'm generally scared of anything electrical I thought I'd share some experience. Short Version If you've fitted LED globes and they won't work, try reversing the wiring connectors. Long Version I actually quite like the look of the OEM...
Back
Top