Tunes for Roadster, open secs, ignition adjusted, mimics GI Pro
Gents,
attached is a Roadster tune with the following characteristics.
* OEM adjusted for Roadster TORS, which means based on map 20355.
* fully open secondaries on all gears, all rpm
* Ignition tables copied to be the same on all...
I am very happy with my change of tune for the Roadster to open secondaries and new topspeed.
the next thing I would like to do is to change the ignition tables to be the same all over.
this is the same thing as installing a Gi PRO ATRE, although it does not exist for the Roadster yet.
the...
Long time reader, first time poster.
I am the guy that extracted the 020355.hex map for Roadster with TORS.
My friend Niklas will provide the tune.
http://www.r3owners.net/trading-tunes/7504-tuneecu-free-tuning-software-14.html
although I usually post at our Swedish forum, r3owners.se, I did...
I had another captain contact me from another town last week and asked if I would mind if he could ride my bike and see if he would like going over to the darkside. I told him sure but that by riding my bike would spoil him because he wouldn't be used to that much power, LOL.
He came by the...
I installed that custom built wiring harness from the guy in Japan today. It uses two relays to bypass the ignition switch so that the lights run directly off the battery. I got the one where you can add a switch to turn off the low beams whenever you want.
It took about an hour to install and...
I am posting this in general tech so Triumph can read it. My Rocket 111 06 model with 11000 klms on the clock has had the ignition switch fail three times. Now I am worried I will be stuck out on the road somewhere stranded due to a design fault. This makes me uncomfortable to take long rides...
Anyone of you R3T owners have any problems with the ignition switch. Had a problem with mine on the Classic (fixed under warranty) and know of a few others who have had problems...just wanted to know if the switch is different?
Dennis
As a lot of you know on the standard and classic models of the Rocket there have been instances where the ignition switch failed...usually at an inopportune time (mine was when I worked at Sears after I got off of work at 9 pm at night.
Have any of the R3T owners seen this problem coming up or...
Of course this happens right before Maggie valley. I'm having a weird problem with my starter. Ignition on, kickstand up, kill switch on ...press the starter button...nothing. Mess with the kick stand... nothing. Get this.... turn the blinker on.... press the start switch and IGNITION...
Here is a quick write-up on the install, few things to note, make sure you are on the feed side when splicing in the wires, the same side that the thick brown wires are on. The only wire that will be spliced in from the other side is the main ignition feed wire, the white/blue fuse2 wire.
If...
Hey guys
I have an 05 R3. Started it for the first time Sunday, started right up. Took it for a long ride, stopped at the car wash and wash the beast then rode it for a couple more hours. When I shut it off and later tried to start it I got only a momentart chatter from the startup routine...
I just attempted to install the ignition switch relocation kit from Rivco. All was well until I went to plug in the extension harness. Problem is the connectors on the Rivco piece are different than what my 2005 Rocket has. Apparently when I had the "upgrade kit" installed last fall, a...
A question for the Captains that have put in the Rivco ignition relocation kit...
Have any of you experienced:
(1) trouble restarting after a long ride?
(2) REALLY hot ignition key after a long ride?
I have and I'm wondering if anyone else has had the same experience.
Why?
Because, the R3...
Of all the silliest little things to go wrong!!
Was at a client site Thursday in Northern Virginia and went to get on the Roc at lunch. Turned the key on, waited for the pre-start routine to finish and hit the Start button. Nothin'. Not a thing. No click. No sound. Checked fuses and all OK...
After purchasing the Rivco ignition relocation kit I started to think about leaving the original tumbler set up where it is considering I still like the limited security that the fork lock still gives (granted it isn’t much but it is better then nothing.) I decided I would purchase a new...
For the fist time ever, the green machine had to be towed away last week. I was riding in downtown Geneva when all of a sudden, the engine went dead, lights, idiot lights and gauges all going off at the same time. And evidently no way to restart the darn thing.
And NO, I had not mistakenly...
Dynojet does make ignition modules for several bikes, but they don't make one for the Rocket. Maybe we can change that.
Just spoke with Dusty Schaller at Dynojet, and he said that he needs somebody to bring in their Rocket for him to check out. Among other things, he needs to know if the Rock...
I seem to have had both of the bolts that hold the ignition column/socket in place. Anyone happen to know about what size & threading they are? I don't have that many metric-threaded bolts @ my house. Jared
has any one moved theyer ignition ?? ive been wanting to and ive noticed theres a place just at the back end of the oil tank , it looks as though the plastic moulding was made for the ignition to fit in ... has any one done it ??