1. BariPlayer

    Difference between triple TORs and stock 06 Std exhaust

    Aloha All, I apologize if this has been asked previously as a search was negative, so here goes: What is is/are the differences between the discontinued triple TORs and the stock pipes on an '06 Standard? In looking closely at various YT videos the TORs appear to be just slightly shorter and...
  2. chrisdouglas

    R3 Classic - exhaust pipes

    I have an R3 classic 2009 with 3 pipes [2 one side and one the other] does anyone reckon that I could replace these with one exhaust either side like the roadster/tourer to make the back end symmetrical?
  3. mark1400

    TOR Exhaust

    hi guys, I'm picking up my rocket in about 10 days time so I've been thinking about exhausts. I don't want to spend a fortune and the TOR exhaust seems to be a decent price. Can anyone tell me are these pipes marked " not for road use" ? Also a question for the guys from the UK.... Do you...
  4. Need some advice about converting my 2006 Classic exhaust to a two muffler system.

    Sooo...I finally decided to ditch the stock triumph leather bags and put some fiberglass hard bags on the back and a fiberglass fairing on the front. I picked up these bags for $300.00 US . They are made fror a VTX and the local guy I got them from used to have them on his Victor Kingpin...
  5. scot in exile

    Sidewinder Exhaust

    Does anyone have a spare or not being used Sidewinder Exhaust System they would like to sell?
  6. Willystyle56

    2005 exhaust options

    I was trying to look into upgrading my exhaust but haven't found many options that are still available. D&d made some nice slipons with a nice price but theyre discontinued. Are all years compatible or do I have to look for certain one? I have a 2005 r3 standard. Oh and does anyone have a...
  7. Aftermarket Exhaust

    Hello Again people, Had to ask another question which I presume is a popular topic...but just to get the latest info. Can anyone advise on a good/loud aftermarket exhaust...I heard of carpenter exhaust and absolutely loved it but just wanted to check if their are any other better options..and...
  8. xlr8tion

    Cheap Arse Clamps on the Exhaust how

    HEY SO YOU ARE GOING TO PUT ON SOME TORS.....But how do you... Remove the broken tail of the bolt from the Clamp? Triumph makes the clamps out of SS and the bolts are galvanized and soft, I think, so they will sacrifice if you try to over tighten them and crush the pipe or cat outlet and...
  9. alpental

    Brute exhaust installation

    Hey guys, hoping for a little advice here. I'm installing a used Carpenter Racing Brute exhaust, and have a few questions: I noticed some high-temp silicone sealant around the copper exhaust header crush rings. Is new silicone sealant required for this install, or can I just use new crush...
  10. Emiel

    Performance exhaust

    My still stock 2015 Roadster is ready for some upgrades: Ramair filter, CAT box bypass, remove secondaries, rev limit to 7500, remove speed limit. Initial plan is TORs, but without considering looks and sound (unless too loud, cops here don't like it) so purely based on performance what exhaust...
  11. Wrecka

    Sound file for my Exhaust

    Headers are from @Evil Mitch , pipe is from @ozrider , tune is from nickos Dyno tuned bike. Synced the throttle bodies today and it seems to sound a bit closer to where it should be. Yesterday after putting it all back together took it for a 200klm test ride , seems to be running right over...
  12. Dennis B.

    Where are you finding this stuff?

    I've noticed a lot of R3 owners with an assortment of accessories, additions, & mods done to their beasts and was wondering, if it is not custom, where are you finding this stuff?
  13. Need suggestions on exhaust

    Hi guys, I am new to this forum..I live in cental PA and ride 2014 r3 roadster..I am planning to change my stock pipes..The local dealer says there are not many for rocket3..Can you guys sugest me any place where i can buy some slipon pipes which sound good for the rocket.. Thanks and...
  14. patrol21

    2009 Stock R3, Full Jardine exhaust and New RAMAIR intake tune needed

    Hi All, Hans0 seems to be having some computer issues so I was wondering if anyone has the matching set up listed in the title and a ECU tune that your running with success...I have a couple on my laptop (listed below) I am going to try but any feedback or a MAP that has been dialed in would be...
  15. MajorTom

    Heat wrap on Carpenter Racing Exhaust

    Started some custom work on my new (to me) 2012 Rocket Roadster. Had the full turing kit on when I bought it (Corbin Fairing, Corbin Beetle Bags), now stripped down for a sportier look. Blacked out some of the chrome bits and heat wrapped the Carpenter exhaust (much less heat on my leg now and...
  16. Exhaust tip corrosion

    Hello everyone. Picked up my new 15 R3T last Sept. 2015. At app. 200 miles, I saw about a quarter size of corrosion/rust surrounding the exhaust tip exit pipe. Shot a pic to the dealer and they responded with we have ordered you a replacement. Well, it took 2 tries to get a replacement as the...
  17. Wannbe

    Building my own exhaust!!!

    My wonderful wife ordered me a Ramair filter for Christmas and I knew I wanted to work on the exhaust also, so I started a project. I knew my stock exhaust was going away either way so I figured I wouldn't be losing anything if I ruined it. I pulled off the cans, cut the front of each one off at...
  18. Buck Mossie

    Jardine Exhaust Baffle Rattle fix?

    The left pipe on the Jardine exhaust for my 2011 R3R has started to rattle. It started a few weeks ago and is getting worse. I believe the baffles have come loose inside, or something else has broken in there... Any thoughts on a fix? I would take them back to Jardine, as they were local...
  19. ricochet

    Thinking about a little more power. Exhaust Questions

    Hey Guys! I think I am ready to add a little more power to my 2012 Roadster. Right now its as bone stock as you can get, but I've always put aftermarket exhausts on all my bikes because I like the sound improvement. I can't find any other exhaust for the Rocket other then the TORS that I like...
  20. Tony Anderson

    Tune wanted to R3 (2004) K&Ns Standard Exhaust.

    Hi all. Now I have got the beast running, I need a Tune ECU tune to work well with K&N individual air filters, a standard cat box and exhaust. I started it without the cat box and silencers.......................now that was a sound :) I have now fitted the cat box, big difference in sound...
Back
Top