exhaust

Recent contents Top users
  1. Ishrub

    SOLD R3 header Flange Covers Rivco and/or OEM version A9738115

    Correction both sets have been fitted before. I can see where the nuts were tightened.. Now out of production and stock at RIVCO USA. Triumph ROCKET III – Triumph – Shop by Motorcycle These are similar to the Triumph version OEM Reference # A9738115 (which I also have for sale below) which...
  2. AndrewK

    Ceramic Coat stock R3T exhaust exchange pipe.

    Just thought I would throw this out here.... Has anyone considered having their stock exhaust exchange pipe ceramic coated. We all know that the cats are in the mufflers on the R3T and since I have a completely stock system, performance isn't a big deal. If money was no object I would replace...
  3. thorin

    damaged Jardine exhaust pipe pics, advice requested

    hey guys, removed the lower portion of my damaged jardine exhaust system yesterday. First thing I noticed was how heavy the pipes are. Heavy gauge metal used for sure! without the advantage of having a "good" set to compare to, I do think they are bent as well as scrape-damaged. for reference...
  4. Kevdog

    What exhaust is this?

    I am trying to figure out what exhaust pipes these are, there is only 2 cans on the right side? I need to figure out what tune to use with them and the small K&N's under the Bear Claw. Its an "05" if that helps. Here is a picture with the stock can on top for comparison and a picture from...
  5. Tal

    Jardine Exhaust system

    I have been browsing around looking at exhaust systems and the Jardine headers took my fancy as being fairly similar lines to the factory look. I like the way the header pipes come straight down and then curve. Different photos on a google search prompted me to send "Jardine" an email and I...
  6. cskals

    Trying to fit a Carpenter exhaust and.....

    Hi all. I'm trying to fit a Carpenter exhaust and all is good, but the bit on the picture can't be installed at the same time, or can it, and I'm just being a knucklehead?

  7. Ramair + Custom exhaust (de-cat) - Tune required

    .
  8. drbig5150

    Exhaust conundrum

    Just got off the phone with Jardine and they stopped making pipes a year ago. What are the loudest pipes on the market, currently available??/
  9. AussieMick

    Exhaust Temperature Difference

    I have a 2017 R3R with standard crossover and TORS. The exhaust gases on the left hand side come out hot and the exhaust gases on the right hand side come out cool. It doesn't look like there is much going on with the crossover, but the path the right hand side exhaust gas takes to exit must be...
  10. kenne

    exhaust header pipe

    Hi all, Building my own exhaust, and need an old set of header pipes to butcher, anyone in the S/E Qld area have one they don,t want or need? cheers
  11. cskals

    For Sale Headers + exhaust 3-2, optimized flow, de-cat and bored out.

    Hi all. Selling my exhaust, all in description. I can't upload videos since they are to large, but here's a link for it: https://www.youtube.com/channel/UC2A5HpmxnpVu0pXiCUcP75A Hope it works. A little drive by's and one with just revs and flames :) 500£ + postal.
  12. Super D.

    Exhaust Header Temp.

    I just got a new exhaust system put on the bike, and it is HOT! It is running between 650-730 F. at idle. Heat Shields would have to be fabricated, so wrapping the header is the only option.... I sure hate to cover all of that nice work. Any suggestions? I currently have the RamAir, and new...
  13. cskals

    Who's made this exhaust, anybody knows?

    Seems so simple, and I think each pipe is same length. Does anybody knows who makes this and if the performance follows the good looks?
  14. RacerX74

    Rocket lll Exhausting Exhaust thread

    I think like me being a R3 owner you may be a little bit exhaust obsessed ....(no just me then !) I'm saving hard to have a custom made complete system and have found some local guys I think are up to the job all they do is make stainless steel headers and systems for almost anything ...boats...
  15. kjones256

    Rider leg exhaust heat

    Considering that I have not yet owned my R3T through the summer months, as I purchased it in February, I don't know if this is normal or not. However, I replaced my OEM pipes with Triumph's T.O.R.s. The last few times I have ridden the bike while air temps have been above 80 degrees F, I...

  16. hi everyone ,daryn from perth .

    hi everyone 2007 rocket111 ,couple of goodies on her tuneboy,ramair filters,jardine exhaust with either long exhausts or custom 3/1 shorty reverse cone, burleigh bars which where a nightmare to fit ,got them on ,,,goes well .will try to download some pics
  17. Msmitch459

    exhaust popping on deceleration

    I have an 09 classic and I can’t get the decal popping to quit. It started after I installed a set of Jardines. I had the ramair already but after I put these pipes on the popping started. I had installed a map from Hanso so I tried him and he made some tweaks here and there but with no affect...
  18. mully95

    Exhaust Science

    Ran across this in another forum: Auto Exhaust Science I have not read it all word for word but will. Talks on automotive engines rather than motorcycle engines but both do relate to one another. I like the part found in "Header Primary Pipe Diameters" " In practice though it is better...
  19. Anomaly

    Carpenter R3 in North TX or Southern Oklahoma

    I'm looking for someone in the North Texas area or Southern Oklahoma area that has a rocket with a carpenter exhaust. I've not been inpressed with the sound of the carpenter exhaust from videos posted online, but people do rave about the sound. Before I try any other performance upgrades to my...
  20. Pumbaa

    For Sale Dave Platt - Performance Exhaust System (Slip-Ons) - Free Shipping

    US$ 500 (Including Shipping) AU$ 650 (Including Shipping) - YES I WILL pay for the SHIPPING From the same company that designed the Shorty Exhaust comes this beautiful setup for the Triumph Rocket III Roadster. Made entirely of 304 marine grade series stainless steel and polished to a mirror...
Back
Top