electrical

Here's a Curley one for you, Happened a few times now, turn key on and no gauge sweep, lights & horn work but no starter. I've had the ignition switch apart and it's like brand new, got EB fitted, earth cable etc etc done Could it be a relay? Cheers for your input

2010 R III touring schematic. The repair manual I have lists the ECM connector as three rows. It also says it's for the touring. This is wrong. My bike uses 2 connectors that are two rowed each. I am hoping to find someone that has the two rowed connector identification numbers. Thanks, Ken By...

Here is the scenario, 2005 Rocket with the Eastern Beaver headlight kit installed years ago. Within the last year or so the headlights will either have a delay in coming on, or between high and low beam. It can be very short or up to a couple of seconds. Does it intermittently, hot or cold...

For those of you that owned an early BSA or Triumph..... brings back memories :) Have fun! ELECTRICAL THEORY BY JOSEPH LUCAS Positive ground depends on proper circuit functioning, which is the transmission of negative ions by retention of visible spectral manifestation know as "smoke"...

hi i have a 2010 rocket roadster, the other day i took a ride stopped and got a pop, went to start it again and it was dead as a doornail. New battery , checked all fuses , rechecked battery connections...nothing, all i have is the brake light and turn signals. The mods to the bike are some led...

I installed the McCruise cruise control, and the Eastern Beaver headlight relay bypass along with his 50A auxiliary fuse box, and in breaking an remaking a number of connections, I note the connections for the most part are coated with some grease-like substance. What is it ?

I am still looking for the electrical gremlin but my oil leak is back. Thought it was corrected (pinched o ring) and some loose valve cover screws. It may have been overfilled with oil at the shop. How much too full will cause a leak? If so, where does it come out? I can't find where it is...

Im finishing up installing my EB fusebox the last thing I need to do is hook the relay to a switched wire. The wire I want to use is a unused plug that can be seen in the manual under the three relays on page 18.26. It is switched power but I don't know what its for would this be a good place to...

Anyone know where Triumph gets their connectors made? I am looking for all wire harnesses for the Rocket. Mass quantity!! YES I am up to something !!!!!!!!!!!:cool:

changed the 05 classic handlebar last night.The new stock handlebar appeared to be a little narrow and had to meddle with throttle cables to install the handlebar. Post the handle bar change >engine stalls(literally dies when holding the throttle) >IDL stepper &(throttle sesone i think ,located...

went for a really nice ride today to support the wife with the Biggest Morning Tea she had arranged at the resort she manages. Got to within about 5 k's back to town after an uneventful 150k's and the blue highbeam light came on, flicked the switch a couple of times with no response then the...

I have a 2012 R3R. 1) Would I benefit from a Eastern Beaver H4 Dual Relay Kit for Rocket III w/Lo Cut? 2) Does it come with DETAILED instructions specific to the Rocket Roadster? Gratitude, 1olbull PS: How the heck does one make the thread title BOLD? :confused:

Wires to connect electrical accessories ? Not direct to battery ,new sound system, want it to turn of with ignition.anybody help?

'05 R3 - Jars, K&N's, TB etc. I used to blow 30A fuse once a year but lately it has gotten much worse and I lost tail light fuse and blew the license plate bulb and idle is crap so I have no choice but to resolve this. Fuse Melted last go round so I spliced in an in-line 30A holder. I...

My mech. needs help ASAP. We are trying to locate the plug which attaches to the spare lighting circuit. I'm adding front running light and want to use the spare handlebar light switch. Bikes apart and I can't ride till we find the connection.

To All, I'm having a wierd issue with the running light portion of the stock brake light. The running light portion doesn't work, but it illuminates properly when the brakes are applied. I've checked the fuses, none blown. I've changed out the bulb for a new one, just purchased. I've checked...

After a bad get-off last November, I am looking at getting a new bike. I had a 2007 Rocket before, looking at a Thunderbird now. Does the Thunderbird have the same problem with burning out ignition switches as the Rocket? Any other serious issues anyone is seeing? I have done some...

I am going to have my 09 RC3 repainted so I have started taking off the rear fender. I have taken all the bolts and screws out now I have to figure out the best way to unhook the wiring. It looks like there are four wire bundles going under the fender. What is the best way to approach unhooking...

Planning to hard-wire a GPS, radar detector & a phone charger into my R3 Classic, each with an in-line fuse & quick detach BNC connectors. Any suggestions as to where best to tap into the electrical system? Also, would like to tap all 3 into the same location if possible. There is a zero chance...

Since I work 4days on 4 off, I have a lot of free time to do stuff. Starting in 6 days I am going to be tearing my new rocket apart to build up the motor. While I have the bike apart I will be doing some custom things. Which leads me to the question, do any of you have ideas for electrical...