Vinyl Wrap?

bcar00

.020 Over
Joined
Jan 2, 2025
Messages
30
Ride
Rocket 3 GT
Has anyone Vinyl wrapped a Rocket 3? After a long search (there's not many here in CA USA) I found a decent deal, but hate the paint scheme. I've wrapped bikes in the past, and I know each tank has it's own challenges. Anyone have any hints?
 
gadget_ho said:
I'm guessing if you have to go to the trouble of taking the tank off to wrap it properly, may as well paint it?
Click to expand...
Thought about that, but paint has the disadvantage of hurting resale pretty bad on a bike like this and good paint work in CA is seriously expensive. There's also a lot more prep work than to wrap. I've painted many bikes and wrapped a few. Some bikes with complicated body work are a complete PITA to wrap. I'm thinking with the tank split in half by the bezel running down the center, that this "shouldn't" be too complicated. But won't know till I try. Sometimes bike tanks are easier to wrap mounted solidly on the bike, but that's why I asked for feedback here. We'll see....
 
Ive Had two of my GT's Wrapped...if you get a good operator its well worth it i feel...the tank is the challenge tho and thats where you want the protection from stones...some operators may choose to wrap the tank in two parts with a join running front to back halfway up the tank...
 
I had mine wrapped with XPEL .. With the Chrome tank I felt it was necessary if I wanted to keep it long term.
 

Attachments

  • IMG_4470.jpeg
    210.8 KB · Views: 45
  • IMG_4471.jpeg
    200.4 KB · Views: 45
  • IMG_4472.jpeg
    180.5 KB · Views: 45
  • IMG_4477.jpeg
    176.9 KB · Views: 47
  • IMG_4488.jpeg
    154.4 KB · Views: 48
  • IMG_7130.jpeg
    122.4 KB · Views: 47
  • 72772164250__7228D846-B522-4ABB-A517-BF2B2B5CEBD3.jpeg
    169.4 KB · Views: 52
  • IMG_4467.jpeg
    237.2 KB · Views: 53
  • IMG_4426.jpeg
    212.1 KB · Views: 52
  • 72721447074__C698DFD3-644B-4CB1-B207-EFD4EAD63ECF.jpeg
    183.3 KB · Views: 45
Ezayakyala said:
I had mine wrapped with XPEL .. With the Chrome tank I felt it was necessary if I wanted to keep it long term.
Click to expand...
wish I had done that when bike was new, thats amazing to keep paint safe from uv damage and small chips from wind
 
Ezayakyala said:
I had mine wrapped with XPEL .. With the Chrome tank I felt it was necessary if I wanted to keep it long term.
Click to expand...
Looks like they wrapped right over the center strip on the tank. That's great, if they were able to do that, wrapping half at a time should be easy. Also looks like they left the tank in place. Do you see any areas at the bottom that didn't get covered completely?

Thanks a ton! This was exactly the feedback I was looking for.
 
Honestly all of this will be based on the skill of the installer. I had another 2020 Rocket 3 before this and even though the guy was working on high end Italian cars he did an awful job on my bike and it was lifting in the corners.

This time I used the dealership guy who works on bikes all the time. He even said the tank on the rocket is challenging. But I don’t see any corners lifting at all.
 
Thanks. Glad to hear the corners are doable without removing the tank.

Cars are tough because of the big panels. Motorcycles are tough because of the complex shapes. Two different skill sets. ANY TANK is tough to do in one piece. Only reason I'd attempt the Rocket tank is it can be done in two pieces
 
Just thought I'd give an update. Although it's not a tough wrap, the raised pin stripes under the clear coat very blatantly show through even the thickest wrap (7.5mil). After doing a trial with both matte and gloss wraps, I decided I would not get the results I wanted. At some point I'll take everything apart and have it sanded down and painted
 
You must log in or register to reply here.

Similar threads

GT Seat Leather or Vinyl?
2 3
Replies
26
Views
964
Jagster
Clear Wrap
Replies
4
Views
654
canecorso
Got the R wrapped with Xpel
Replies
1
Views
753
whatthe
Menu
Log in
Register