Tuneboy Tuner in Nashville

[BlackSails]

I found a tuneboy dyno tuner in Gallatin, Tn. Jeremy Weber at Classic Motorcycle Performance.
I stopped by just to get a run in after my mods. Ramair, Paul Bryant crossover, & TORS. The map I most recently installed was the 20258 off the tuneecu custom maps section.
The result was 145hp 154Tq.

I sent him a bunch of tuneecu links along with the forum link. Maybe he'll join us
But it'll be good to have another tuner around
Anyway, I was pretty happy with the numbers.

 

[Claviger]

Looks good, curves look shaped right for the hardware on the bike. Good results

 

[Paul Bryant]

So was this withy my header ? or just my cross over pipe ?

 

[BlackSails]

Just the crossover. Your header is next on my b-day/xmas list

 

[warp9.9]

I found a tuneboy dyno tuner in Gallatin, Tn. Jeremy Weber at Classic Motorcycle Performance.
I stopped by just to get a run in after my mods. Ramair, Paul Bryant crossover, & TORS. The map I most recently installed was the 20258 off the tuneecu custom maps section.
The result was 145hp 154Tq.

I sent him a bunch of tuneecu links along with the forum link. Maybe he'll join us
But it'll be good to have another tuner around
Anyway, I was pretty happy with the numbers.

So does he do tune boy or tune ecu or perhaps both. Since you down loaded a t2ine ecu map I'm guessing you meant tune ecu not tune boy?

 

[Bedifferent]

I found a tuneboy dyno tuner in Gallatin, Tn. Jeremy Weber at Classic Motorcycle Performance.
I stopped by just to get a run in after my mods. Ramair, Paul Bryant crossover, & TORS. The map I most recently installed was the 20258 off the tuneecu custom maps section.
The result was 145hp 154Tq.

I sent him a bunch of tuneecu links along with the forum link. Maybe he'll join us
But it'll be good to have another tuner around
Anyway, I was pretty happy with the numbers.

I noticed there are two 20258 tunes listed on the custom TuneEcu site. Which one did you use? The Tovami or the Killersmap? Did he mod the maps in anyway?

 

[BlackSails]

Hey Scott, The first stated Jardines, which I took to mean Jardine Headers. So .. i used the second one, which listed almost exactly my set up. Except that I have the Paul Bryant crossover that eliminates that piece of "horror in a box" (thats what she said)
- Triumph TOR exhaust., - Subsidaries removed., - KN triple filter installed ,- No Lambda sonde, - Gipro,
- Max power: 147.7 Bhp at 5756 rpm, - Max. Torque: 237.5Nm at 2332 rpm, - Speed limit: 240 Km/h,
- Speed Adjust: - 3,9 %, - Thrtmo Fan: 95 °C, - Rev. Limit: 6800, Thanks Hans (Ballyono) from NL

 

[BlackSails]

Additional De-Classified information for Engineers only:
More specifically, the Torvami map, as is, with no additional mods except that I changed the speedo setting to match my tire (200) and current tire wear.

 

[foxviewnet]

Hey BlackSails that is some welcome news in my court. I need to call him and see if he can help me tweak a Hanso Tune. I have been pondering what to do as you may have seen my thread of minor desperation a few days ago. Thanks for sharing with the group. He is only a couple of hours from me.

 

[BlackSails]

He currently just uses Tuneboy but can definitely tune a rocket 3 as he checked his licensing while i was there. I've also sent him all kinds of links to tuneecu since he expressed interest. Anyway he's about an hour and a half from me too as i'm down in Franklin. Maybe we can do some riding some time when the weather gets a little more comsistent. Shoot me an e-mail Gary ... clearviewpi@aol.com