Riser for a handelbar rocket R
Bnolan said:
i have been looking at these for my 2021 r3, how did they work during your 1200k trip?
Click to expand...
This ride went fine, did 450 k days, would have liked bars back a bit mote, that might be because I am used to the old rocket though.
Arms no sorer than usual and back and neck the same.
Will stick with the set up as is
Had great weather, dodged some rain and no stops by those nice men and women paid to let us know how accurate our speedos are.
Got 16 per litre and 267k before refueling, still had a couple of litres left,
 
DFWAI said:
Yes, 1 1/4".
Click to expand...
I am looking for a little up and back on my bars, ready to order if so... Is this the "1 1/4" Block Offset Risers for 7/8" OR 1 1/8" Handlebar" part 3R-B12POE? Would the 1 1/2" work (they look out of stock)?

1 1/4" Block Offset Risers for 7/8" OR 1 1/8" Handlebar- Silver and Bl

Lifetime Warranty Made in the USA 1 1/4" Rise These risers can be bolted to OEM clamps with a bolt spacing of 31mm-42mm Moves the handlebar 1" up and 1 inch back in the rearward position, or 1 1/4" straight up in the forward position. (can be installed running either direction) These risers have...
roxspeedfx.com
or

1 1/2" Barback Riser for 2013+ BMW R1200GSW/ R 1250 GS / GSA, 2016 S10

1 1/2" of Total Pullback [Moves the bar ~1 1/4" up and ~1" back from the stock position] Lifetime Warranty Made in the USA Includes Mounting Hardware Clear Anodized Finish Works with Stock Cables — see our cable rerouting instructions These risers were specifically designed for the 2013 and...
roxspeedfx.com

I sincerely appreciate the help. So hard to find a spot to get accessories for this bike in one place.
 
$124.80 20％ Off | Motorcycle Handlebar Clamp Spacer Handlebar lift LC 22mm For Triumph Rocket 3R Rocket 3GT2019-2022

Locks legitimate with brake and clutch line extensions!! Looking like stock but closer to rider and higher!!
 

Attachments

  • IMG_1660.jpeg
    56.1 KB · Views: 47
  • IMG_1659.jpeg
    89 KB · Views: 49
  • IMG_1658.jpeg
    92 KB · Views: 49
I'm 6'2 as well, just got my 2023 R and have the Voigt risers ready to go. However I only have 450mi on the bike so far and am still not quite sure about installing them, I need to do a lot more riding to know for sure.
 
You must log in or register to reply here.

Similar threads

Here is a place where to get a paint matched for your Rocket
Replies
0
Views
98
A1A Rider
Does any Rocket version have a black frame for the TFT display?
Replies
1
Views
177
gadget_ho
Handle Bar Clamp/Riser Bolts
2
Replies
10
Views
1K
Taz
Anyone ever ridden a Suzuki Boulevard M109R? How would you compare it to Rocket 2.5L?
2
Replies
14
Views
673
Azisbest
Is the rocket a dangerous/unforgiving bike?
3 4 5
Replies
42
Views
2K
2023R3GT
Menu
Log in
Register