R3T Handlebar Risers

[Limbuck]

Can you guys tell me where I can get some risers and how much height I can get away with keeping the OEM cables and wiring. I'd like for my bars to come back to me a little more. Really offset rearward risers is what I need. Can I get by with 1" or 2"? Thanks all.

 

[GPMAZ]

Rivco risers will work. You should remove the clutch cable from the plastic shroud that holds it to the frame rail. As I recall they are either one inch up and two back or the other way around.

 

[rainman]

1 on the rivco risers they work graet no need for any new cables the clutch cable needs to be routed to the inside of the triple tree

 

[COMick]

The Rivco risers are 1 up 2 back I believe, and all I had to do was reroute the clutch cable.