Penner tune on a 2023 GT

In the standard maps section of TuneECU there is an Argentina, Indonesia and South Africa stock map, you can always load the Penner tables into that and apply it.
 
Does anyone have the later UK GT map (my VIN is AV7307) with the Penner maps imported? I am not 100% confident in doing it myself but will have a go if I have to
 
RazMan said:
Does anyone have the later UK GT map (my VIN is AV7307) with the Penner maps imported? I am not 100% confident in doing it myself but will have a go if I have to
Click to expand...
The stock all markets (including the UK) GT map from VIN AV5456 is map 31248. The Penner maps are for prior vins. I copied the Penner F, ETV3 (sport), and AFR tables into 31248. Penner’s L and I tables are the same as stock for the all markets GT (which is not always the case depending on the market and model). Since the stock tunes are the same for US and all markets, and R and GT, I would think that all of Penner’s tunes would be the same. Penner’s ETV1 (rain) is f’ed up in the all markets GT tune so I left rain and road as stock. Sport is unrestricted up top and more aggressive than stock. Can’t attach it here so PM me your email address.
 
Last edited:
PM coming your way bud
 
Elsewhere in this forum are concerns about putting Penner’s tunes on Euro 5 or new 2022 or 2023 Rockets. I’m not sure if the newer stock tunes (see above) are for Euro 5 but since they are specified as “from vin AV5456”, one could assume they are. Then one only has to copy Penner’s tables into these tunes.

People have had Tuneecu crashing independent of this issue. Here is a link (post 795) from this site to a Tuneecu recovery method for the new Rockets:

Free unrestricted maps for Rocket R GT and TFC now online

I become more and more determined to leave my bike alone........... Yep I suddenly have a brand new obdlink lx still in the box for sale!!!
www.r3owners.net
 
Last edited:
On a 2'500 ccm Rocket 3 - Motor we should get at minimum 250 bhp - stock from factory!

But you see: 200+ hp is quite a lot when you consider that there is about 250 Nm of Torque on top of that.

Here 200+bhp/~250Nm Rocket 3 power in action:
 
Last edited:
rider1802 said:
On a 2'500 ccm Rocket 3 - Motor we should get at minimum 250 bhp - stock from factory!

But you see: 200+ hp is quite a lot when you consider that there is about 250 Nm of Torque on top of that.

Here 200+bhp/~250Nm Rocket 3 power in action:
Click to expand...
Mine, at the wheel, is 173hp and 152tq now. Where I really notice the tune is at highway speeds, 60-80mph. The throttle input response is amazing. If you drop down a gear? Brutal. Two gears down will have you in beast mode…. It is truly amazing. Thank you Konrad!
 
rider1802 said:
On a 2'500 ccm Rocket 3 - Motor we should get at minimum 250 bhp - stock from factory!

But you see: 200+ hp is quite a lot when you consider that there is about 250 Nm of Torque on top of that.

Here 200+bhp/~250Nm Rocket 3 power in action:
Click to expand...
200 bhp is BS. The dyno graph shows 170.49 rwhp after removing the throttle restriction. This is the same as what people are getting from Penner’s tune, which is free
 
dougl said:
200 bhp is BS. The dyno graph shows 170.49 rwhp after removing the throttle restriction. This is the same as what people are getting from Penner’s tune, which is fre
Click to expand...

As I wrote just use the tuned Maps from Tuner Ulf Penner for the TFC, as a good tuning basis !!!

+ Remember: 170 rwhp is about 200 bhp eq. (167 PS on R/GT or ~175 PS at TFC) +35 or +25 PS == 200 PS
- So please don't blame me what I have posted. Thanks!
 
Last edited:
You must log in or register to reply here.

Similar threads

TuneECU help loading Penner map 2020 R Android
2
Replies
10
Views
985
gadget_ho
Penner tune for european Gt
2 3
Replies
24
Views
3K
rider1802
Free Penner map without speed cutter
Replies
9
Views
1K
Nashvegas
Is it a risk to put on aftermarket pipes without a tune?
2
Replies
11
Views
734
A1A Rider
Penner tune?
Replies
5
Views
2K
hogweed
Menu
Log in
Register