original tts supercharger instructions

its fitted or was on an 06 only reason it broke was the fixing plate behind the crank pulley was left loose ,not by me and the crank snapped / sheared just at the end of the bolt hole . so i have the pully spacer etc and the timing gear in my hand and the timing chain flopping about in the cover
 
pics of charger and bracket wich bolts to top engine mount and crankcase and the snapped crank end / pulley
 

Attachments

  • 20250117_163158[1].jpg
    207.6 KB · Views: 11
  • 20250117_163222[1].jpg
    215 KB · Views: 11
  • 20250117_164625[1].jpg
    171.5 KB · Views: 11
  • 20250117_164633[1].jpg
    159.7 KB · Views: 13
  • 20250117_164647[1].jpg
    246.9 KB · Views: 13
Thanks. I can't say I've seen that hardware before, not sure if it is even TTS. If it is, it must be a very early/first version of the kit.

Anywho. If it's just drilling of the crank you are interested in, you'll need the drill bit, taps and guides for both.
I presume TTS will sell you some, or you could get them made locally with the dimensions off mine if you like.
 
You must log in or register to reply here.
Menu
Log in
Register