Memphis Shades batwing fairing

ahpd1992

.040 Over
Joined
Feb 14, 2009
Messages
67
Location
Huntley, IL
Memphis Sahdes has come out with a batwing HD FL style fairing, its looks very nice and is priced well below the Corbin offering. Im wondering is anyone else has seen it? I wonder what the chances that it will be offered for the R3T

Tom

www.memphisshades.com
 
Buy a mounting kit and put it on.
If a stock mounting kit don't do it for you, try a handlebar mount from national cycle.
I thought it'd be cooler than that,
just looks kinda harleyish..One headlight and all.
Now if they made one with TWO headlights, that'd be cool.
Kinda like a road glide but not butt ugly..
 
I dont even see Triumph listed in their applications page, so I guess Il wait until Monday and call to see if they have a mounting kit.

It does look kinda "Harley-ish" but then again the R3T is basically a Road King with a marine diesel motor
 
Ya, but the R3T is still a Triumph at heart.
A little TLC (and tuneboy) and you'd never know it wasn't a "real Rocket" unless you looked at that single headlight.
 
This may be dumb but can't you use the stock windshield mounts I want a fairing on my r3t but I am not going to pay what Corbin wants
 
I had to make up brackets since the ones it comes with, even on the one I am using was not meant for the R3 forks. The R3 forks are about 1.75 inches further apart than a HD and even if you get the VTX mounting hardware it is too small, by about .25 inches.

It also makes a diference if the forks have chrome covers over them or not, on the R3T the original shield brackets protrude past the chrome covers so it was not to big a deal.

Now I have a batwing that comes of in under 3 minutes. Using this fairing



HEAD
 
National Cycle has a 1 inch mount.
It's the one I'm using to mount a road glide fairing.
Don't know if it'll help in your quest, but it works for me.
It was about $33.00.
 
mounting brackets

Head, it appears that you used the Memphis mounting brackets for the VTX is that correct? If so, which VTX was it for and did you have to make any mods to the brackets?
 
xhdskip, do you have the part number for the national bracket and did you have to make any mods at all to the windshield mounts?
 
You must log in or register to reply here.

Similar threads

Fairing
Replies
3
Views
1K
jeffro18
Fairing for R3 touring
2 3
Replies
23
Views
4K
2012cliff
Fairing for my R3T
2
Replies
19
Views
2K
Chip
Another proud owner of Tsukayu box, fairing, and trunk
Replies
8
Views
3K
Ava8harrierusmc1
Alternate fairing
4 5 6
Replies
55
Views
15K
Earthquake
Menu
Log in
Register