Map for 2013 Rocket Roadster (Ramair + Dave Platt Outlaw exhausts)

[sscc]

Hi,

I am based in the UK and have recently bought a 2013 Roadster (and also recently joined this forum). The bike already had a ramair filter and I just put on Dave Platt outlaw exhausts. I don't think it had been tuned properly in the past and the new exhausts seems to have made it worse. I have got ECUTune and am looking to put on a decent map.

I did have a look at the resources section and downloaded what I thought was the right map, but it seems to be incompatible.
Could someone point me to the right map to use?

Thanks !

 

[Ward]

I've got a 2017 R111 Roadster (one of the last batch) also with Ramair & DP 3-piece exhaust. I run: 20773Map Opti fⁿr Tom.hex - it seems to work perfectly, full power with all limitations removed. I've attached it

 

[sscc]

I've got a 2017 R111 Roadster (one of the last batch) also with Ramair & DP 3-piece exhaust. I run: 20773Map Opti fⁿr Tom.hex - it seems to work perfectly, full power with all limitations removed. I've attached it

Thanks!
I will try this out.

 

[sscc]

Thanks!
I will try this out.

I loaded the map successfully and now the bike does not start. The engine management light is flashing when I turn on the ignition and there is no crank.
I am going to load a base map on to see if that at least gets the bike to start.

 

[sscc]

Ok, panic mode off
Issue is resolved by loading a different map for the pre 2014 models.