Reply to thread

[USER=6118]@Paul Bryant[/USER]  I may be in the market for a new exhaust system soon and was wondering if the twin can system you mentioned in a previous post could be done in stainless steel to include the headers? I have a single can Reband system on my 09 standard and it has several issues...to wit...the mild steel headers need to be recoated every couple of years and it is a pain in the @ss to get the headers installed and sealed up where they don't leak since they are are in multiple pieces. In addition, this bike has corbin bags on it and the exit angle of the exhaust gases are pointed at the back of the bag so the right side needs to be cleaned a little more often and I had to put additional heat shielding on the bottom of the right side bag. I have a CES system on my 13 roadster where the header is mild steel and the can is stainless. Same deal on the coating for the headers but much easier to install since it is one piece. The can still looks brand new after 2 years. So I have tried a couple of the systems touted on here and both have performed well but each has their own issues. I would like my next system to resolve those and I do not want to re-install the Rebands. I would also want heat shields for the header. Very tired of either roasting my right leg or having to wear some sort of heat protection while riding in the summer