Trying to start her but the alarm won’t let me turn it over from the start button I put new battery in fob but when I use the fob it’s dose nothing is there a way to reset the alarm think it’s a datatool and triumph is on the fob.
if it was triumph alarm there is a connector plug (as a guess 2 inches by 1 inch that has two wires looped) and that eliminates the alarm.
under tank.
u have to should have it in neutral (green light on) and the clutch always has to be pulled in in order for it to turn over.
not making contact is a very common problem on the r3s.
hth
if it was triumph alarm there is a connector plug (as a guess 2 inches by 1 inch that has two wires looped) and that eliminates the alarm.
under tank.
u have to should have it in neutral (green light on) and the clutch always has to be pulled in in order for it to turn over.
not making contact is a very common problem on the r3s.
hth
That's the plug for the right hand side controls iirc, the alarm one is the same plug to look at only black. And further down the bike on the right side chassis spine than that white one.
You can use the redundant side of the black plug to make the jumper/bypass plug for the alarm.
Oh yes the left side controls has a black plug too but that's up at front of engine over cylinder 1, and should be clipped to a bracket. Don't want to mix them up
That's the plug for the right hand side controls iirc, the alarm one is the same plug to look at only black. And further down the bike on the right side chassis spine than that white one.
You can use the redundant side of the black plug to make the jumper/bypass plug for the alarm.
Oh yes the left side controls has a black plug too but that's up at front of engine over cylinder 1, and should be clipped to a bracket. Don't want to mix them up